Wiper Parking

[Guest Steve Allen]

Nearly there but hit a problem...........

On the last hurdle to completion, just the interior to finish but have come across a problem which i hope with some expert advise will be easy to resolve. I have used the Sierra wiper motor and today have started putting it all back together,Scuttle on, wipers made etc. Having bolted the wipers in place they park in the wrong position i.e Passeneger side and on the sweep over go to the vertiacl position, This does not do much though for the driver. is there away of changing the parking position around so it's drivers side first !

All the pics I have seen of RH's always have them the right way so is it just a case of swapping wires around. Totally lost so good advise needed.

Steve A

[Les Welsher]

I think that if you take the small link arm off the motor spindle and put it back on in a position of 180 degrees from where it is now then the wipers will move in the oposite direction

[Guest Steve Allen]

Les

Sorry but what do yopu mean by the link arm! Is it a simplr job or all the motor and arms off again. If so going to cry now. Scuttle off job if so.

Steve

[Les Welsher]

Simple job,

it's the small link arm that connects the motor spindle to the other arms.

Unbolt it off the spindle, rotate it 180 degrees and bolt back on.

TRY HERE

 

Les