Rear Coil Over Top Brackets Wanted.

[Guest jusycom]

Hi , has any one got any rear top coilover brackets for a 2B the ones that slide up tube . contact me if you have will sort out payment. cheers justin.

[Guest chris brown]

Unless you are using zimmers the original hood ones are no use to you as they were much narrower you will be best off making your own as they are only a U section welded onto a bit of tube

[fry61]

The outer tube of your old Sierra shocks are a tight sliding fit in the roll-over tube (must be greased or it gall) plus 3mm mild bracket will make a better fitting top mount than GBS supplied; but if you want a quick fix I have an un-used GBS set.

[Guest jusycom]

Cheers , I think i will make my own then , i've got rear gaz shockers to go on and i know they are wider on the bushes. ta justin.

[Guest Mike-16]

Hi , has any one got any rear top coilover brackets for a 2B the ones that slide up tube . contact me if you have will sort out payment. cheers justin.

 

Hi I got mine from GBSC a couple of quid only...Mike