Superspec Instrument Cluster

[Guest jwts]

Hi,

 

I have a 2004 SuperSpec with the single central instrument cluster.

 

It was all working but now the main instrument illumination and both the fuel and temperature gauges have stopped working. I assume the fault must be either a single supply line or earth wire that is common to all three circuits . All the other warning lights (oil, ign, main beam, indicator and handbrake) are working.

 

Does anyone recognise this problem or can suggest where I should check on the two input plugs on the back? If I have a pin where there should be a voltage or an earth reading I can work backwards to see where the break is. I have wrapped my wiring in split sleeving and loom tape so I’d like to be sure which wire I need to check before cutting into it.

 

A diagram or table showing the correct readings expected on the pins of the rear plugs could be a sufficient starting point for me to trace the break.

 

Thanks in advance for any info,

 

John (jwts).

[harvs]

Hi John

 

All those items (temp, fuel and backlights) are on the right hand side - ie the left hand side when looking from the back of the cluster. I'd guess that maybe the connector has come loose / is not making a proper connection? (The one which you had to use silicone sealant to fix it).

[TonySuperSpec]

Hi

 

The attached may help

 

i generated this when I built my SS

Instrument Panel Details.doc