Breaking A Robin Hood 2b

[Guest old_timbo]

Chris,

 

I'm interested in the propshaft. When was it made? Photo?

 

Tim

[Guest krisyoung33]

hi are you selling the wind screen wipers

[Guest night hawk]

Hi

I would like the dash please.

[Guest Getting There]

Hi to both.

 

Sorry but the car had no windscreen so no wipers.

 

Again I am sorry but the dash got broken whilst removing from the car as the glue retaining it was stronger than the wood.

 

Cheers

 

Chris

[Guest old_timbo]

Chris,

 

Propshaft? See my earlier post questions.

 

Tim

[Guest Getting There]

Hi

 

Sorry about late reply, needed a gentle nudge!! It was made by Robin Hood and the Kit was purchased in 2004, used for the first time 2009. It has been greased every 2K miles.

 

Cheers

 

Chris

[Guest shane-wilkins]

Hi

 

After the accident last year, I am finally able to split the parts from the car. The car had completed 5000 miles at the time, and is a 2B wishbone.

 

Gaz Shocks Front pair 375lb 9" springs - £100

 

Front End, wishbones, dummy struts, mud guards, steering rack, coolman rad (has a prof repair done), checked against another 2B and it is straight and fine, will cut the chassis at the welds, may replace the front end of a sliding Pillar? - £120 - Sold Steve Wilson

 

Prop Standard Robin Hood regularly greased - £20

 

Injection setup, lowered plenum, injectors, fuel pump, dizzy, air mass meter, ECU, wiring - £130

 

Exhaust stainless 4into1 with standard Robin Hood silencer £80

 

Mirror Set Carbon Fibre look wing mirrors, and small internal mirror (all cost £60 new) - £20

 

front Indicators on extenders (Passed SVA) - £15

 

Fox 15" racing Wheels, with Toyo Proxes on 2 5mm tread, and Goodyear on 2 5mm tread set of 4 - £100 - Sold Stuartl

 

Front Headlamps with H4 lenses and seperate side lights - £25

 

Shortened Sump with 4mm steel sheet and extra capacity pot and pick up pipe - £50 (May be a delay on collection as will go with the engine and will need to get in back) - Sold Dave R

 

Cobra Daytona Seets in Black, with Sabelt 4 Point Harnesses, in OK condition, has damage to the base sides, but cant be seen in a 2B - £40 - Sold steve Wilson

 

Dashboard and Tunnel cover (foam padded, covered in black vinyl), inc Sierra clocks - Donation to Hoody Fund

 

Pinto Engine & Gearbox - £30 - Sold to Grizzly

 

I need the standard parts to go onto the new chassis, so they are not for sale. Any other parts that are wanted; please PM me, they are free to a good home, although a donation to the Hoody Fund will be encouraged!!

 

If any one wants any of the items please reply below, then send me a PM, then everyone knows who got first dabs on things. I would like these to be collected from Huddersfield, West Yorkshire, although I will be at Exeter show, and can stop en route to meet.

 

The parts will be removed over this weekend. I will give the Rhocar Members first dabs on thing, what is not sold on here will be listed on Ebay next weekend. Pictures availlable on request.

 

Many Thanks

 

Chris

[Guest shane-wilkins]

hi i have 2.0 pinto will your full exhuast fit if so very interested will have to corrier thou cheers shane.

[Guest night hawk]

Hi

 

has the Exhaust gone yet?