Bright 6 Warning Lights

[Thrashed]

Need some help again.

 

I have a premier wiring loom and the bright 6 lights.

 

Using an 8 way connector block I connected the premier and bright 6 together. What I have is the following issue. The oil warning light and battery light stay on permanently.

 

The bright 6 has the following wiring colours:

yellow - right indicator

Brown - brake test

Blue - oil warning

White - battery ignition

Red - main beam

Black - earth

Orange - left indicator

Green - live feed

 

Premier loom colours

Blue/White & brown - main beam

Brown/green & black - oil warning

Blue & black - charge light

Brown/yellowx2 & black - low brake fluid/hand brake

Black/green - indicator

Black/White - indicator

 

How would you wire this up?

 

Thanks

[Guest rich44]

HI hope this is of some help but as for the indicators you will have to test the premier loom to see which is left and right and you will have to find out a live feed should be a ignition live and then use a good earth point hope this was of some use

The bright 6 has the following wiring colours: Premier Loom

yellow - right indicator

Brown - brake test Blue - oil warning

White - battery ignition

Red - main beam

Black - earth

Orange - left indicator

Green - live feed

 

Premier Loom

Brake test-Brown/yellowx2&black

Oil warning-Brown/green&black

Battery ignition-Blue/black

Mian beam-Blue/white&brown

Edited January 3, 2011 by richard 44