Fitting A 7.5" Diff

[Guest ickle]

Any advise. is the only difference fitting a 7.5" diff in the 7" hole the physical size of the diff mountings ??

 

Regards stuart.

[theduck]

In fitting to the chassis then believe yes. Though shafts are also different iirc.

[Guest ickle]

Kk If I get the whole back end is a straight bolt on ?

[Guest Tim Norman]

Thats what I did. Managed to pick up a refurbished Cossie rear subframe for a snip. While I fitted it I took the opportunity to beef up the front mounts from the bent 1.2mm thick plate on the chassis to a more substantial 2mm plate both sides. That way the subframe is held on both sides of the bolt.

[Guest ickle]

Perfect just wasnt sure about hub sizes and shafts etc.