Electric Speedo Sender

[chris27]

Hi folks

 

Got a problem with my speedo sender ... It's not working!!

 

The sender is located in the most inaccessible area of the car and without dropping the gearbox again would be near impossible to change, so wanted a little advice about putting a pickup on the hub ...

 

It needs to feed a pulse 4 times per revolution up to the speedo as per original and I aim to hook into the loom

 

I'm looking to see if I can get a generic sender that I can bracket up and pop 4 mags onto the hub...

 

Any advice where I'd get one??

[Al Milton]

Chris, the easiest solution would be to contact your speedo manufacturer (ETB, Smiths, Acewell for example) and get their sender.

That way you can be certain of compatibility for wiring in.

 

Just a suggestion

[chris27]

Hi all I'm using standard mr2 dials and have got an ten sender working a treat by wiring into the main loom and popping the magnets onto the back of the hub

 

Cheers

 

Chris