Starter

[Guest Toddy]

Hi Guys and Gals

 

I need some advise on wiring a push button starter. The Variety i have is a toggle switch with warning lamp and the push button itself, can anyone give me an idiots guide to wiring this up. Many thanks in advance. P.S. Its to a 1.6 Pinto.

[Guest rizla]

hows this

[Guest daveg]

Toddy

 

I am fitting my starter right now

 

The Ford ignition switch is designed to prevent the starter from engaging when the engine is running by requiring the switch to be moved to the 'engine off' position first...

 

If you still want to fit a push switch all you need is switched positive to switch and other side of switch to starter solenoid. The soleniod has a male spade terminal so you need a female connector...

 

Dave

[Guest rizla]

this was the switch that the diagram was for

[Guest Ianz]

Rizla

 

Do you have the big lump that the switch bolts to????????

 

 

 

Sorry I could'nt resist that

[Guest rizla]

:boohoo: :boohoo: :boohoo:

sometimes people hit you where it hurts :boohoo:

[Guest Ianz]

Rizla

 

Again a big "SORRY",but I know you'll come through all this,

and I know you'll keep smiling!!!!!!!!!!!

 

[Guest rizla]

your forgiven

[Guest Ianz]

Cheers !!!!!!!!!!!!!!!!

[Big Jim]

Hey Rizla! only 3 more months to go them it's it's birthday! (or whatever!)

[Guest Toddy]

Cheers guys. Sorry its been a long time replying, the diagram is spot on but i did`nt get any cable or instructions with it so i will endevour to go ahead and fit. On the diagram where is the feed from, is it from key barrel on the possition 2 or 3. Many thanks RIZLA.

[Guest rizla]

your welcome toddy