Jump to content

Julian Bolt

Community user
  • Posts

    6
  • Joined

  • Last visited

Everything posted by Julian Bolt

  1. Hi I have a super spec with 14000 miles and have a noisy clutch/ thrust bearing, My guess.its the flywheel bearing . Do you have the bearing size and Make/part no Regards Joules
  2. Hi I have the 200cc rover engine Superspec on road since2006 (10000Miles). I am in south (Surrey/Berks boarders If I can help Email Me on j.a.bolt@btinternet.com Regards joules.
  3. Hi Tim My concern is, that my Mems ecu is giving engine emmisions to close to the MOT limit, and I was Not sure if the emerald would give me any gain/adjustment (even if only by them). I Know that they work very well on the ford engine.But have not heard any reports on the Rover Engine. Regards Julian
  4. Has anyone fitted An emerald ecu to a superspec with the Rover T series engine. If so can they please advise me.
  5. I have a super spec with Rover t series engine With NO heater . For 3 years had heating probs, Finaly Found that the 12mm pipe |(over the exhaust) was a return feed for a heater With it conected at the thermastat and at the rear of the engine was causing an air lock/flow problem blanking both ends and fitting kenlow thermostat has almost totaly solved the prob.
×
×
  • Create New...