Should I Bin My 1.6 And Get A 2.0 Litre ?

[Guest ColinR]

Andy

 

Just be wary when stripping the injection loom out. I had disengaged my brain and after unplugging the CPU under the dash, decided that it was easier to get the wires out with the plug off - so I cut the loom. My comments are not printable once I realised what I had done. There is a big grommet which will allow the plug to be pushed through to the engine bay (I found this after cutting).

[st3v3nw]

i'd be interested in taking away your 1.6 as i based my 2b on a 1.6 and had to scrap it sooner than i should have, now im missing loads of bits and im gutted. im fitting a 2 litre 16v vauxhall engine so hope the brakes are up to that!!

[st3v3nw]

forgot to mention, a few beers your way will definately be in the deal

[Guest Andybarbet]

It's yours if ya want it but i see your up north - im down south and the cars got no MOT now.

 

Was a runner when i got it in november but brakes were sticking on the way home, just would rather someone take it away for bits than scrap it as it seems a bit of a waste.

[st3v3nw]

ah

i now see how far away you are!! maybe its better left to somebody a bit closer. thanks for the offer though

steven