Sierra Ignition Barrel

[Guest Stewfinn]

Hi all,

Can anyone tell me if it is possible to remove a sierra ignition barrel WITHOUT THE KEY.

I have looked everywhere and all I can find is how to remove it when you have a key

Any help on this would be much appreciated.

Finnie

[Redspec]

Read this thread it MAY work

 

http://www.rhocar.org/index.php?showtopic=24678&st=0&p=190793&hl=++remove%20++barrel&fromsearch=1&&do=findComment&comment=190793

 

Good luck

[Guest Stewfinn]

Fresh Hacksaw blades for tomorrow it is

Thanks very much for that.

Finnie

[David S]

The only way I could do it was to drill out the locking pin and then drill out the barrel and basically pull the whole thing to bits. Eventually all the internals fall out and you can grab the barrel and twist it until it comes out. There was no real finisse to the way I did it, but eventually it worked.