Zero Rear Diff Location Of Front Bolt Access

[Guest whiz]

Hi Guys I'm looking at changing the diff on the Zero I can see the front of the diff and the side of the mounting blots. But I cant seem to find the bolt head. it appears to be inside the cockpit behind the seat. the only bolt head down there is the one holding the seatbelt. does anyone have any pictures that may help.

Andy

[Guest Lowlife]

Up from the seatbelt mount about an inch or so and back maybe two, may well be coveres in carpet.

[David S]

Sunday 2nd Jan 2011 on my blog http://gbszerobuild.blogspot.co.uk/2011_01_01_archive.html may help if you want an image.

[Guest Alan_builder]

I thought the 2 front lower diff bolts screwed directly into the diff casting?

[Guest whiz]

They do Alan but where do screw through to get there I can't find head of the bolts

[Guest greavesy7]

I thought they are inside the top tunnel panel

[gr8nomad]

I have just checked WB - still in bulid stage and they are located 130mm to the rear and 40 mm above the seat belt mount. That put it just a whisker in front of the seat back panel.

This is pretty much as Lowlife reported above, and there would be every reason to suspect that the access hole has been covered by carpet of the like.

Hope that helps.

gr8nomad - from down under.

[Guest whiz]

found them thanks under the carpet just where you guys said they where