Fuel Pumps For Zetec, These Ok?

[flameredturbo]

The below ok? Low pressure to feed swirl pot then the high to feed the injectors... Thanks in advance.

 

Just seen very similar set up on photos of other cars but would like to confirm.

 

http://bit.ly/1cJ38sv Low

 

http://bit.ly/1b47Cqn High

[blue]

I use the cube one on my 2.0 black top and it's fine but I bought the original facet one . Beware of the cheap Chinese copy's

I use the webcon (weber) combined fuel pump /swirl pot . Less plumbing etc

[flameredturbo]

Thanks, I've got the swirl pot already so I'll go ahead with these bits. Thanks again.

[Guest mcramsay]

Both pumps are fine, all I would say is you need to use an inline filter before both pumps, I has one of those low pressure pumps fitted and I didn't use a filter, which resulted in me having to give the fuel pump a slap when I broke down half way round a roundabout. Scrap the filter/inlet that comes with the pump and fit a separate inline filter, that way you can see if it's blocking up. Chances are as you build the car you will get *bleep* in the tank. Regardless of how careful you are.