Weber 45 Parts

[lockyer89]

If anyone has any of the following for a pair of 45 DCOE Weber's laying around somewhere hidden in their garage...(preferably x4 of)

 

Main Jets - 145mm

Air Corrector Jets - 180mm

Idle Jets - .50f9

Emulsion tubes - f16

Venturis (choke tube) - 38mm

Aux Venturis - 4.5mm

Edited September 25, 2014 by lockyer89

[Guest Ian & Carole]

Like I said yesterday you are about to waste £100+ on stuff you are not really sure will sort your problem out.

 

Just my humble opinion though.

 

I really hope you prove me wrong, good luck.

[lockyer89]

Don't get me wrong I do 100% agree with you, and really appreciate everyone's input. I just thought if I aim for the correct Venturi size it will give me a good starting point! Just seeing if anyone had any lying around...aiming to get it booked in somewhere for next Friday.

[Guest plasterman]

Just take it to a rolling road they will have all these bits in and fit them and sort the car out for less than £200.

Had mine done earlier in the year best money i have spent,the car flies now.

[Peter Bell]

I do have 2x F16 emulsion tubes 2x 180 air correction jets and 4x 140 mains, 2x 50F6 EW idle jets 2x 60F2 EW idle jets. 2x 50 pump jets and 2x 60 pump jets if any of these are of interest?

[lockyer89]

Thanks Peter, I'm actually off to a rolling road session on Friday morning and they have already ordered what they need in... Appreciate the reply though!

[Peter Bell]

No problems, reminded me of why I fitted bike carbs. Good luck friday