Front Brake Hose

[dandan62]

Hi. One of my front brake hoses is looking a bit past it. The other one looks almost new. I am trying to source a new one but such a simple thing seems difficult. Its a sierra based S7 and the existing hose is approx 28cm long from caliper entry to bulkhead. It goes straight into the body side. Does anybody know a good source? Are the fitments sizes anything unusual or are they universal? Thanks everyone.

David

[maccavvy]

I've got braided ones that may be of use..400mm Inc fittings

Edited July 17, 2016 by maccavvy

[dandan62]

That's a kind offer but sadly too long. I think I have found one in fleabay but was hoping for a more reliable source. They must come from a standard car but not a Sierra.

[maccavvy]

I am including fittings too.. I use hoseteknik or help for new lines

[Guest 2b cruising]

CBS braded hose made to length, or supply diy.

Very simple to make your own.

Only tools required. Vice and spanner.

If you call them they will tell you what parts you need and how to put together.

Like already said very easy to put together. Don't think. BRAKES I can't do that.

Alternative, take old pipe to any parts shop and they will match it.

Easy to strip out. Remove the metal pipe off the hose fitting inside of the panel.

Take off the securing sprung slip clip from the hose fitting. Might be a big nut not a clip.

Pull the hose from the panel and unscrew from the brake caliper.