-
Welcome to The UK Kit Car Club
Don't be shy! Join in the fun by registering to post on the forum, and to get full benefits you can buy 12 months club membership for just £20! Membership includes a quarterly club magazine, discounts with insurance companies and specialist suppliers, exclusive, early or discounted access to a number of events each year and much more!
-
Available Subscriptions
-
Recently Browsing 0 members
No registered users viewing this page.
-
Similar Content
-
By raeautos
Check on preloved website
http://www.preloved.co.uk/adverts/show/119139907/robin-hood-kitcar-track-day-car-with-car-trailerono.html?ref=advert-
-
By Spats
Hi, I bought an old 2b with sliding pillar partially built - 2 years ago. Lots and lots done, basically rebuilding the entire car, bit of an engineering project!! and we have just completed a GBS wishbone suspension rebuild on the front and replaced the damn awful pillar suspension! The car currently has a mg metro steering rack on that we have removed. I want to go to a ford rack to match the sierra track rod ends and extenders we now have. Would a mk2 escort match or what have other members fitted? Any help would be appreciated
-
By Tweedy
I'm putting my 2B+ up for sale as it is getting so little use.
The kit was purchased in September 2005 and the car was completed in February 2008. It passed the IVA test first time on the 8th of February 2008.
The car is registered as a Robin Hood and is on a Q plate.
The current MOT expires on the 30th of July 2018.
The engine is a Sierra 2L DOHC fitted with a Weber 28/32 TLDM carburettor and a Motocraft engine management system.The fuel tank is aluminium.The gearbox is an MT75.
Full weather gear is included.
The bonnet is hinged in front of the windscreen.
Wheels are 15x6 alloys fitted with Yokohama 205/50 tyres.Suspension is via Gaz adjustable coilovers.
ETB gauges were fitted in November 2010 together with a birch faced dash.
Engine cooling is is via a Coolman radiator and electric fan.
Sabelt safety harnesses are fitted and a fire extinguisher is included.
A new battery was fitted last year.
A jack, spare fuel pump and engine management module are included.
Price £3000
Let me know if you require further details.
-
By Simon Parish
Well its come to that time when I have made the decision to sell my 2B.
So here goes:
Its a Robin Hood 2B with a 2L Pinto engine with an injection head.
It Has ZX9R bike carbs on a Danst Engineering Manifold
Type 9 5speed gearbox and sierra rear end.
Martin Keenan Custom built Silencer - giving it a sweet noise and put a smile on your face each time you start it
It has Full weather gear that fits
Has a set of 5 Uniroyal Rain sport 3 tyres that have done around 400 miles since fitted last year ago.
There are numerous other spares that will be sold with the kit. These include a Front Geometry kit purchase form GBS for the vehicle but never fitted, A brand new set of GAZ shocks that are still in their boxes.
The paint on the body is flaking in a few places, but its superficial, just a rub down, some primer and a respray and it will be as good as new
The log book is correct and its registered as a Robin hood 2B
Its MOT'd until April 2018. Its covered 16,708miles
I'm looking for £3995
I'm located in Crawley - will answer all questions and anyone who wants to view the kit with an eye to buy is welcome
Picture of the kit are here:
-