Lenses

[Guest cooperman]

Hi all

 

Has anybody got an idea where I can source good value lenses for my fog lights and reversing lights - GBSC seem a little expensive to me

 

Thanks in advance

 

Ian

[Guest siby]

try your local caravan supply store im sure i read on here somewere that they were very cheaper

[swan]

hi

 

complete fog lights from show was only £3.

 

not sure of cost from caravan centres.

 

One on london road derby .

 

Got rear light lenses from them

 

swan

[agent_zed]

i was just pointed at this place http://www.premierwiring.co.uk in my thread on headlights. They also have other lights cheap. I actually got my light from a local motor factors but it was the same ones and about the same price as on this website (the ring square lights £4). It matched the one that RH had supplieed me as well, not sure what you got as it varys a lot. They went through SVA with no probs except i had to pad the Fog light out to get it vertical as i'd mounted on the back panel.

 

hth

[Guest cooperman]

Thanks all, will try the caravan place

[Mat-Moo]

I'm also on the look out for the same, and went to my local camping/caravan/trailer place... but they do not sell reversing lights, only fog lights

[NeilD]

these seem cheap enough.....

 

link

[Mat-Moo]

I was looking at http://cgi.ebay.co.uk/ws/eBayISAPI.dll?Vie...A:IT&ih=019 - also has a Fog version as well (From NAS land rover/discovery)

[Guest juat]

I was looking at http://cgi.ebay.co.uk/ws/eBayISAPI.dll?Vie...A:IT&ih=019 - also has a Fog version as well (From NAS land rover/discovery)

If you choose this style of rear fog light with a domed lens can you mount direct to the rear panel or do you some how mount it vertical ?

[Mat-Moo]

The back panel on an exmo is almsot vertical anyway, so doesn't effect me. However from what I have seen of pics of the plinth, there should be enough on it to grind it down and mount vertical to remove any slope (Don't quote me as I do not have one yet).

[Guest salty_monk]

Mine have always required a wedge shaped block for SVA... you can take it out after. Bit of 2 x4 cut at an angle roughly painted black will do it.

 

Dan