Zero On The Road

[Guest andyp]

............well kind of , picked up my zero kit just over a month ago ,got some wheels today so managed to roll it out the garage . the front cycle wings are just rested on but what sort of placement do they need to be ? eg how far from the front of the wing to the braket ?

[Guest scrabster]

hi, sva man told me they need to extend over the edge of the tyre by about 1 inch.no measurement forwards. not sure now its iva. just as a matter of interest i see from your pics theres vents in your bonnet,did you ask for them or are gbs putting them in as standard?

jess.

[agent_zed]

Hi,

i was under the impression that the wheel arch must not be further back than the steel/alloy part of the wheel if you drew a line from the floor virtically upwards at the front of the rim. On my 2b my wings sit about 1 inch further forward than the mounting bracket which is further forward than the front of the rim anyway. HTH

[Guest andyp]

hi re to jess the vents are a kind of upgrade

re to agent zed cheers for your help it will give me something to work to

 

 

Andy

[Longboarder]

IVA rules as I understand them are basicaly as shown on the diagram below. Where you put the supports is up to you.

 

Nigel

[Guest andyp]

cheers fo the advise , just had a mesure up and it seems the zero front wing is well oversize so all should be ok .