Which Model Have I?

[Guest crimpdoc]

I trying to i.d. which hood I have purchased! It looks like it was first reg'd in early 1999, the log book states the make as 'robin hood S7', chassis no. WF0AXXGBBA.

An ideas what model it is or what differences set them appart.

As mentioned before my digital camera is useless.

[Guest Tim Norman]

Do you have the registration number? The previous owner may have been a member

[Guest TerryBarry]

The chassis number appears to be the first part of a Sierra VIN - without the engine number.

Terry

[Big Jim]

to identify which model it is, we need to know what the front suspension looks like.

No matter how bad an image your camera gives, lets see one.

[Peter Bell]

As Jim says a picture is necessary as there are many different types. If your front suspension looks like the one below with an angle iron frame supporting the top wishbones it is a Mk1 S7. If it has a cortina front subframe it is a cortina based one but some of those have a proper wishbone set up as well.

Where abouts do you live in no information?

Peter.

[Guest crimpdoc]

Peter, it looks very similar to your pic, with the radiator mounted in front of the suspension set up, under the nose cone. The reg number is DAY188Y OR DAY388Y of the top of my head, I live in Lincoln

[Guest bryan_andrews]

Can't offer any help with the identification but it's nice to see another hood owner from wet cold & windy Lincoln.

[Guest Roger 2B]

I'm not far from Lincoln, about 40 minutes in a Northerly direction, south side of the Humber opposite to Hull.

 

Being in Lincoln you may be interested in ...

 

East Coast Kit List