Mini Wiper Park Switch ?

[speedtripledan]

Mini wiper motor park switch, green is live ign what is the green brown i.e what gets applied to it or what wire from my mk 5 stalks goes to it ?

 

cheers

[knights_templar]

Hi again

 

you are looking for a pin on the wiper part of the switch that goes live when the wiper switch is OFF, and no power when switched ON.

 

On the Sierra switch it is either pin B1 or B2. may possibly be the same coding on other ford switches.

 

this has to go to pin 2 of the wiper motor

 

1

3 2

5 4

 

you probable have the rest figured out.

 

if not re post

 

regards

[speedtripledan]

cheers for the info , figured it out using 2 x 5pin relays and a drawing i found on the internet, now for the washer circuit that seems to have a permenant 12v+ on the output going 0v when the switch is pressed will prob use another 5pin relay to control this as well..

[Guest MarkB]

cheers for the info , figured it out using 2 x 5pin relays and a drawing i found on the internet, now for the washer circuit that seems to have a permenant 12v+ on the output going 0v when the switch is pressed will prob use another 5pin relay to control this as well..

 

 

if it goes to earth when switched, feed a live to the washer pump and the live from the stalk... switch... circuit..squirt.. wipe.

 

 

thats how the battery light works... although on yours it might be connected to the reverse lights or something similiar

[maccavvy]

i did exactly what mark said above with my mk5 stalk and washers.

 

live to motor,and wire from switch to pump earth, this goes to earth when presed..squirt. job done