Tracking On S7

[churchy]

Hi all, just renewed all my front ball joints, anti roll bar bushes,lower arm components, drag link joints and track rod ends on my sierra S7 with inboard coil overs and come the 1st april the car will be on the road, The first thing will be to get the tracking set up and i did not know the settings for this or do i tell the garage it is the same as the standard sierra setting.

can anyone help me with this question before i wear my tyres out,

cheers Andy

[blue]

Hi tracking is as near to dead straight as you can. 0 deg toe in /out

[Guest mower man]

As above ,definitly no toe out 1.5 deg neg camber , 4to8 degs pos caster ,tried and tested by most mowerman

[churchy]

Thank you guys, once again invaluable information, very helpful, cheers Andy