2B Rear Wishbones?

[agent_zed]

yeah on the 2b the shock mounts might be a problem too. I've been looking at where to put them too and the problem is the rollbar isn't in line with the center of the wheel so taking the coilover off the top of the hub carrier won't work as it is on the haynes one.

 

Did wonder about an insert into the roll bar with a bracket sticking backwards. Would need to brace it across the boot though to take the force.

 

Unless its possible to take the suspension off the lower wishbone nearer the front edge as that would be more inline with the rollbar. But the lower wishbone would need to be modified slightly i think. Would it be strong enough? i'm assuming it would as the front suspension takes the weight on the lower wishbone.

[Snapperpaul]

You can run off an extended bottom wishbone bolt, front or back, upper or lower

I'm looking at rear lower