Zetec Loom Wiring.

[nelmo 252]

Well, GBS have also offered to make up a wired plug for the 18-pin plug as well.

 

Not cheap (probably about £50 for both plugs wired up) but I'd rather not have to hack off a professionally wired plug and replace it with my home-made effort, especially considering I've already done my own engine loom which is a potential snakes nest of problems - be good to be fairly sure that I shouldn't have to worry about the dash instruments.

[2b cruising 597]

£50 not excessive if you consider the work put into it.

[nelmo 252]

£50 not excessive if you consider the work put into it.

 

True - have to wire and crimp 38 pins...if I'd done it myself, the plugs alone cost £25 and I would have then had to wire and crimp 76 pins!

[Disco 0]

Thanks all for your guidance.

I will look into purchasing the dash extension because I hate changing things that supposedly already work. If I only have to follow the wiring diagram and solder wires together this would be my choice .

 

God luck to all of us at this tense stage of the build!!!!!

 

Chris D

[Disco 0]

I have also purchased the dash extension and I have fitted it today

Next bit of fun checking it all works

 

Chris D