deano266

There is a single entry form and it has a section for the club. Did you register the club stand as rhocar or robin hood owners club? Just so it marries up with your application

OK thank you and I will do. Hopefully they can do and I wasn't sure if it was only done through one club form or something else as this will be my first time to tatton park but I have done stoneleigh twice now

Is it too late to register for this event

Dean

OK quick update. It looks like it could be the switch stalk, as i can get it to work if i miss out the switch, so we are going to get a toggle switch with two positions on to see if that works.

No i can get dipped beam but no main beam. We are now switching to drl headlights to negate the sidelight issue but the main beam is still an issue

Does anyone have a wiring diagram for the Vicky green wiring diagram so I can possibly trace the wiring to find the fault

I have power to the red lead, however the blue/red and blue /white do not. Could this be the relay or something else as cash get dipped beam but no full beam

I have power to the red lead, however the blue/red and blue /white do not. Could this be the relay or something else

I don't have any power to the 3 leads and have replaced fuses for all the fuse boxes. This wiring is doing my nut in

This year we may have to bring our superspecies down on a trailer as my dad is going in for an op on 10th April and doesn't think he will be able to get in and out the hood. Is there anywhere to take the Mondeo and trailer as we really want to bring the car to the show stand

I wonder if its a faulty flux capacitor also haha

I'll try and get some pictures uploaded to make it easier

The new unit is completely metal but still no lights. Where could I wire in an earth from the 3 pin connector or bullet connectors to give an earth

Just looked at the unit and the unit is metal with metal fixings but the wires have a sleeve round them. Which wire or point on the connector to the bulb should be earthed

Where should the earth be taken from

Roughly where would that be. The engine bay is an absolute jungle of wires and after the junctions they are all red or separate to different colours

Hi guys

Recently just changed some old tatty headlights to some shiny new ones and now don't have a dipped beam or main beam, but do have sidelights and indicators. The wires are connected correctly to corresponding connectors and the bulbs do work as tested on another vehicle.

All fuses are working and the switches work.

Does anyone have any ideas

Dean

On the way back from Stoneleigh the fuel gauge decided to drop dead although it came back to life momentarily. We have a Ford Escort Dash hooked up to a Ford Fiesta fuel tank in our superspec

Any help on the wiring diagrams and or possible fixes would be greatly appreciated

Me and my dad own a superspec a rover 2.0 with a mt75 gearbox

Hi all

the other day i took of the spare wheel on my Superspec and didn't realize that whoever built it hadn't put retaining nuts on so off came one of the threaded rods but the nut is now deep under the fuel tank.

Is there any way of fixing the second bolt and nut back on and also getting under the tank without taking the whole back end apart

Thanks

Dean

What's it like in the sunlight

Hi. Where can you get a full digital GPS dash that includes the rev counter and all the lights.

Hi i am looking at getting a trailer for my Robin Hood Superspec but dont know the actual weight of it as there is no documentation for it. The main thing we want is to be able to know roughly how much the car weighs and what good estate cars are good for towing it to and from track days

Thanks

Deano

I can't find him on eBay but what size are they and does the material matter

Hi. I have a superspec and when we bought it someone had put two plastic elbows with braided hose on thst have now cracked. I managed to get some hydaulic hose that fitted it and was compliant but it still leaks from the elbow joint into the master cylinder. What is the best solution for this to stop all leaks