2.0 Litre Pinto Dipstick Length

[Guest Ian Maycock]

Could somebody please measure the length of their dipstick from the underside of the stopper the max and min lines? I have recently changed my engine an realised that on the dipstick I have there are no marks to indicate the oil level in the sump. The dip stick appears to have been cut off.

 

Regards

 

Iggy.

[Dave R]

at least 2 different length tubes to go with the dipsticks....

 

had yours a metal spring at the bottom, and an electrical connection at the top, or just a metal loop ?

[Guest Ian Maycock]

Hi Dave

 

I will measure the length of the tube tonight but the dipstick just has the metal loop at the top.

 

Iggy

[Peter Bell]

Tube on mine is approx 225mm and marks are 360 and 380 down if that makes sense.

[Guest Ian Maycock]

I have measured the tube and it is approx 230mm to the block. The dipstick has been cut at 360mm from the bottom of the stick to the underside of the stopper. Based on Pete's measurement it would appear that stick is too short.

 

Does anybody have a spare dipstick?