Evidence Required -- Safety Issues.

[Snapperpaul]

I know that the prop on KwikArfs failed as Gavinc pulled away, twisted up like a piece of gum before parting.

The propshaft tube was as thin as exhaust tube

[fry61]

Up-date on propshaft question, 748 views, 30 posts, 16 returns of info requested & none of these of a failed 'shaft; so appears to be of little concern to our readers; ------------- now how do I get this yellow stain off my boots!!

[Guest mower man]

Hi re props Ithink mine may have been made up by prop doctor in Bradford like Lee's I scraped the sticker off to fit the speedo signal magnets ,but seem to remember the name HTH mowerman

[Guest salty_monk]

Kit type: 2B Sliding Pillar

Kit Purchase Date ,2000

SVA May, 2001

Total mileage 3700 (when I sold it)

Type of prop failure - None

Maintainance - Never greased it !

Engine Pinto with DGAS & Piper Cam

Diff standard 3.9 matched to donor then 3.6 followed by another 3.9.

Gearbox T9 5 speed

100 bhp @wheels

 

 

Kit type: 2B Wishbone

Kit Purchase Date ,2002?

SVA 2003?

Total mileage 4000 approx (when I sold it)

Type of prop failure - None

Maintainance - Never greased it !

Engine Pinto with DGAS & Kent Cam, mild porting

Diff standard 3.6 matched to donor & gearbox but not matched to Engine

Gearbox T9 5 speed

100 bhp+ @wheels

[Guest Jonathan Tall]

Here you go:

 

Kit type: EXMO

Date of Manufacture: finished 1998

Purchase Date: June 1996

SVA Date: not applicable (Pre SVA)

Total mileage: c.7,500 to date

Type of prop failure: Broke at Diff end

Maintainance: Broke before it was a year old!

Engine Size: 2000cc

Mods: 4 into 1 Exhaust Manifold, otherwise std at time of failure.

Std: Std apart from the above

BHP: 100 ??

Diff ratio: 3.92

Matched Engine & Diff: Yes