Carbon Fiber 3d Vinyl

[owlman2222]

Hi all

 

has any one used this 3D vinyl before.

 

http://www.metrorestyling.com/Carbon-Fiber-3D-Vinyl-s/2693.htm

 

looking to put a new dash in and if u have used it how dose it look and how easy is it to work with.

thanks jon

[Andi]

Not sure, but lots of finishers are using this stuff

 

http://www.idsfinishes.com/auto.html

 

 

Andi

[stevedohc2b]

yes just done it see here

got mine from carbonmods

 

Stephen

[Guest greavesy7]

its really easy to use

 

all you need is a hair dryer to make it more workable

[owlman2222]

looks good steve thats the look i amam after, was it easy to use and what 1 did u use the sheet carbon fiber or the kit carbon fiber

jon

[stevedohc2b]

It is like sticky back plastic ( Blue Peter )

 

it will stretch when warmed with a hair dryer £30 for 600mm x 1200mm

 

web link

 

Stephen

[owlman2222]

tx will give it a go

[stevedohc2b]

I could post you an off cut if you pm me your address

 

Stephen

[owlman2222]

pm sent that would be great thanks steve

[Guest sandy77uk]

It is like sticky back plastic ( Blue Peter )

 

it will stretch when warmed with a hair dryer £30 for 600mm x 1200mm

 

web link

 

Stephen

 

are you pleased with the finish? i was going to leave my dash as the exposed Fibre Glass but I've marked it so need to cover it now, my only concern with Carbon effect stuff is it can look at bit...cheap if you know what i mean

[Guest The Modfather]

Any marks under a wrap will show through. You will need to smooth down any marks first.

[megadodo]

Here's mine, dead easy to do.

 

http://www.rhocar.org/index.php?showtopic=28271&st=0&p=214777&fromsearch=1entry214777

[stevedohc2b]

Confess I was inspired by yours.

 

Stephen

[Guest scottie686]

Yeah i've used it. did the front and rear arches on my zero. Hair dryer works but using a heat gun made it a lot easier to use.

 

 

 

Scott

[owlman2222]

got it stephen, thanks for sending it, like the look of it going to give it a go

jonathan