Brake Reservior

[ragey]

Hi Chaps.

At last years newark show there was a hood with the brake reservior facing inwards, Does any one know whos it was

Or how it is done. I would like to do this mod my self but not sure how it was done.

Paul.

[steve in stockport]

Could have been mine, use the link to the garage below for the pics.

Otherwise it may have been somebody who has fitted the Zero pedal box as part of an engine swap.

[Grim]

gbs sell a pedal box to suit the 2b that does this also.

[speedtripledan]

Mine now faces onwards, I used the gbs zero box not a 5 min job but good now it's done

[speedtripledan]

Mine now faces inwards, I used the gbs zero box not a 5 min job but good now it's done

[richyb66]

Mine now faces inwards, I used the gbs zero box not a 5 min job but good now it's done

 

Changed from outwards to inwards in unbder a minute - impressive!

[ragey]

If im right when you put your foot on the brake pedal it pulls the shaft out of the master cylinder So if you turn the cylinder round, when you push on the pedal it will push the shaft into the cylinder , How have you got round this.

paul

[speedtripledan]

If im right when you put your foot on the brake pedal it pulls the shaft out of the master cylinder So if you turn the cylinder round, when you push on the pedal it will push the shaft into the cylinder , How have you got round this.

paul

 

does that help

 

 

[ragey]

i think i get it, the brake pedal is on a pivot hmm ill have to think about that.

thanks chaps for your help

paul.