Sva At Beverley,

[Guest battery joe]

We took our car for an Sva at beverly today and unfortunetly failed. But luckily only on 2 things which were

• 1.Our handbrake mounting angle (1 inch angle) was flexing ever so slightly which in itself was no problem but unfortunately we had bolted our T Piece to that and because its a rigid pipe he failed us on that.
  
• 2. Rear Right brake was not good enough when the handbrake was applied
  

Ian was very fair and helpful and Beverley testers seemed very friendly.

 

Drove through 3 inches of snow to get there (Luckily we were in the Mondeo, Trailering the Hood )

 

So soon be there folks

 

Joey and Bill

[Guest battery joe]

Not a good start

[Guest Guy]

Nice one Joe, Don't fix it too fast, you've got all the time in the world you know

[Mitch]

Hi Joey,

 

Great news

 

Well if thats all they could find wrong then, you have done well.

 

Easy sorted, book it in for the retest and get it regestered,

 

Good luck with the retest, look forward to seeing the finished car at Stafford and reading you're report for the Mag

 

Well done Joey (you too Bill, but its not you'res you only watched him build it)

 

Mitch

[Guest TerryBarry]

Good on yer both - shouldn't take much to fix that

[Guest stu205]

the swines!! you would of thought they would of passed you for effort getting there!!

 

be on the road by easter eh mitch!!

[Les Welsher]

Good result joey and bill,

Should take no time to sort that out.

Didn't the tester question the positioning of the battery

 

Les

[Guest craig030774]

nice one lads

i am hoping to take my 2b to beverley soon have spoken to them on the phone seem to be helpful

they did say however that people that have got sliding pillar suspension will fail if they follow the video and put a second taper in the front sierra hubs

[Guest ant.b]

nice one bill n joey , see you on the road soon i guess !

ant

[swan]

Joey/Bill

 

Not long to go now.

 

On the home straight and the winning post in sight.

 

ATB

 

Swan

[Guest Bazwaz]

Well done to you both! A good result. Hope to see you at Stafford.

Barry.

[Guest chris brown]

Well done Joey it sounds like an easy fix just point out what you want doing and get your man to do it properly this time.

[swan]

Joey

 

That's the trouble you sub-let just 2 bits of work and look what happens.

 

Swan

[Guest Battery Bill]

That's the trouble you sub-let just 2 bits of work and look what happens.

 

 

 

One good bit was when he started he got out his "Sphere" and went to the front RH wheel and looked for about 2 seconds then stood up and said " Have you done an SVA Before?" And then put his "Spere" away

He was very complimentary about the car and said that the position of the *&(*&* was the best he had seen

Now whens the snow going to stop

[Guest Tony Tank]

Well there is light at the end of the build tunnel

 

Good to see you are nearly at the finish post.

 

Well done to you both

 

Tank

 

See you both at Stafford