Jump to content

deano266

Community user
  • Posts

    366
  • Joined

  • Last visited

Everything posted by deano266

  1. Hi guys. How have people attached the doors and what hinge and fixings did you use
  2. Take the with screen off and mount the wing mirrors in the holes for the brackets. For my mot I just stuck one on the wing with a suction cup and it passed
  3. Hi guys just found out that at the moment they have a 15% discount code I'll leave it here Ashhose Your welcome
  4. Thanks but we need to swap one over as the one they made isn't right so needs to go back anyway. Just need to know if I need the 19mm hose
  5. Hi look g at a polo radiator. Do we need the 19mm hose that goes from the radiator over the engine and back into the loop
  6. Would a polo radiator work sat at the front with either a blowing or sucking fan on it
  7. Hi guys. I know the radiator is from a Rover sd1 but what is a suitable replacement. Got one from coolex but it wouldn't fit in as it was still to big (width). Or is it best just to replace for another sd1 radiator
  8. As for head lights I wired in two separate switches for main and dipped beam
  9. I just wired in some drl headlights to make sure I had sidelights. Plus they look cool. The only thing I haven't wired in is the 'if' box to turn them off when headlights are on but mot and police have never even bothered. In fact a cop even liked them and the ingenuity of them
  10. I converted to the ford focus stalks and column shroud. It fits nicely onto the steering column and also puts the indicator on the correct side
  11. Hi guys. Just discovered that the oil stick guide for the dip stick actually doesn't sit well in the dip stick hole. There is about 1/2 inch of the internal part to the engine sticking out and not sitting in it properly. What could I do to fix this or what should the right one be Cheers
  12. I have but the gauge is very jumpy at about 3000 revs. I have checked connections and they all seem good so I was looking for an alternative as the ford one was fine
  13. Or pin 20 which would be easier
  14. Theoretically I could use pin 25 to take a rev reading
  15. Hi guys does anyone have a wiring diagram for the mems ECU in the superspecies as I'm looking to see if it has an output for revs
  16. ill be there on the sunday
  17. deano266

    Etb Gauges

    the speedo is taking its signal from the bolt heads. Does it work better with magnets as the instructions said the recommended method was for that. Is there anything that i can do with the coil pack to stop it from messing about or could it mean the coil is on it's way out as it seems good and is delivering a good spark to the plugs
  18. Hi I can successfully login via my phone and pc but cannot login via my tablet at all. Does anyone know of a fix
  19. deano266

    Etb Gauges

    Hi guys. Just installed a on etb set of dials. Everything works fine apart from the rev counter and speedo. Upto about 2500 revs the rev counter is fine but then it bounces all over the play (connected to negative terminal of coil pack. Also after about 85mph on the speedo I get the same (connected up using the rev magnetic sender sensing the propshaft bolts). Is this normal or have i fone something wrong when setting them up?
  20. Yea I will be however I have just found a degraded and leaking radiator pipe so that needs fixing first. If it's not one thing its ten haha
  21. Good point. What would be the best way of testing it as it does move slowly through the temp range and will go up and down as I move
  22. Hi recently changed the coolant in the car because it was running really hot. Now it's still as hot 100 to 120 in normal traffic with a blow and a suck fan. Is this me just worrying as we have just changed from a plumbed temp gauge to the etb one. Cooling has never really been an issue on the car before. Any help really appreciated
  23. Hi guys what coolant is best to use in the superspecs t series engine as it needs replacing
  24. Hi guys.i have a very weird issue. I had indicators earlier on but the all of a sudden I only had the left hand signal but no right hand signal at all but when I turn on the hazards i have it but no signal at the stalk. Is this a stalk issue or is there a fuse for it
  25. Hi guys. Just fitted all my new shiny etb gauges and the fuel gauge always reads full no matter where the arm is set. The fuel tank is the ford one in a superspec
×
×
  • Create New...