Steel Tube Off-Cuts

[fry61]

Hi all,I require short pieces of steel tube 38 O.D x 2.5 wall (33mm bore ) anything longer than 75mm will be fine --- need to produce 75mm sleeves at least 50 times so total length required is around 4M. Thanks for any help or pointers.

[johnhetherington]

I've got steel tube 38mm OD but the bore is 34mm, is this any use to you, if so I can bring it along to Stoneleigh.

Haven't measured what the length is, it's tucked away in the corner of the garage, but its the pipes that came with the kit for the exhaust.

Will measure the lengths if it's of interest

John

[fry61]

Thanks for the offer, John. really want 33mm bore to be an easy fit over 32mm tube. But may suit if no other comes up, what length do you have, is it s/steel or mild & cost please.

[agent_zed]

whatcha making?

[Guest fatherhood]

Hi Bob, can order some in for you, no that expensive. Just shout if your stuck.

[fry61]

Hi Bob, can order some in for you, no that expensive. Just shout if your stuck.

 

P.M sent Dave, cheers.

[fry61]

whatcha making?

 

Nothing exciting --- just modifying the garden shelter we use for BBQ's

[johnhetherington]

Just checked and I've got 5 pieces with various bends and curves in them, reckeon you could get 8 or 9 straight bits out of it.

Its mild steel and yours if you want it.

John

[fry61]

Thanks for the offer John, but I need 50 x 75mm at least -- will see what Dave ( Fatherhood ) comes up with .

[fry61]

I've got steel tube 38mm OD but the bore is 34mm, is this any use to you, if so I can bring it along to Stoneleigh.

Haven't measured what the length is, it's tucked away in the corner of the garage, but its the pipes that came with the kit for the exhaust.

Will measure the lengths if it's of interest

John

 

Hi John, if you can still deliver to Stoneleigh it would be most welcome, supplier wants min £240 order -- which is rather a lot for a suck it see project.

 

Hopefully see you there, cheers Bob.