Jump to content

Recommended Posts

Posted

On the 2b where do the bottom of the seatbelts mount? On the outer frame there does seem to be a flat with a hole that could be used. But in the middle of the car there is just the tunnel which has no strength really.

Posted

You will need to fit a reinforcing frame under the floor for the seat mounting bolts and the central seat belt mountings.

Most of us made an "H" pattern in angle iron that bolts to the lower chassis rails.

HTH

Posted

Angle iron running across between the rear subframe mounts, useful for both the handbrake cables and the inner seat belt mounts.

 

DSCF2633(1).JPG?width=450&height=278&cro

Posted
2 hours ago, Bob Tucker said:

You will need to fit a reinforcing frame under the floor for the seat mounting bolts and the central seat belt mountings.

Most of us made an "H" pattern in angle iron that bolts to the lower chassis rails.

HTH

Do you have a photo of what you've done please?

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...