Setting of TDC

[rory Cosgrove]

Hi All 

 

Sorry if this has been asked before but couldn't find anything directly related.

I've had the head and block of my pinto skimmed and are putting the head back on, it has a KC FR33 camshaft and an adjustable pulley on the front. There doesn't seem to be any marks to line the pulley up with for TDC, does anyone know how to line this up with the adjustable pulley and shaft stated, really don't want to wreck the new pistons etc by getting it wrong. 

 

Many thanks Rory 

[Jez Morton]

If I remember correctly you need to time the CAM at full lift on inlet valve one with crank at 108deg after TDC.

Edited April 9 by Jez Morton

[Bob Tucker]

Kent Cams instructions follow. Check timing details for FR33, from memory I think Jez is right. But check it anyway.

https://www.kentcams.com/files/kent_cams_catalogue_2012_a5.pdf