gncgray

Bugger, it`s now in the skip!!!

Thanks guys Prices a lot better then GBS. I have put the Coolman rad in my "watching list".

Hi Can someone tell me please what car the Zero radiator comes from? I was jacking it up yesterday and it fell from off the jack and the axle stand went through the rad!!!! Just had a look on kit parts and a new one is £100!! Cheers Graham

I`m using the new Zetec you get with the kit. It has already got the clutch fitted to the engine. Would it have the spigot bearing already fitted inside it?

Cheers guys Does it go near the splines on the input shaft from the gearbox that goes in to the clutch? Graham

Afternoon all Happy new year to everyone. Lying in bed the other day and remembered that I haven`t fitted a spigot bearing. Now being really lazy now, does it need one or do I need to take the engine out and put one in? Is this what I need? http://cgi.ebay.co.uk/FORD-SIERRA-TYPE-9-5-sp-GEARBOX-SPIGOT-CRANK-BEARING-/310237513932?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item483b98c8cc Thanks guys Graham

Just wanted to wish you all a happy Christmas and a great new year. Hopefully "Zoe" will pass it`s iva and we can meet up at some shows. Graham & Nicola

Cheers guys Effing hell, they know what to charge. How much is a retest retest..lol Thinking I might need that Gray

Afternoon all I have been readinyg about pricings for the SVA, the price has gone from £540 to £200. Can someone please tell me the correct price? Ta Gray

Oh dear Thats the biggest slatting I have ever seen on a car review. After seeing that biuld quality I`m really pleased with mine. Heres the link for the review, although you do have to sit through hours of adverts. Well a few minutes. http://www.five.tv/shows/fifth-gear/episodes/episode-18-83 Gray

I`m to young to be all nostalgic

That sounds like it could be at Boreham, Ford used to own it and test there rally cars. The RS200 was born there amongst others. I was going to take my Zero to Burn airfield just outside Selby (North Yorkshire). It`s a gliding club now. Gray

Cheers guys I thought it might be a bad idear, trailer it is. I was going to tow the car to a local airfield and have a play (not in this snow though) Gray

This might be a daft question but can I tow "Zoe" even though she`s not registered? Told you it was daft Graham

Cheers Dinger, without you lot "Zoe" would still be a powder coated chassis. Ta Gray

Cheers mate The digtal gauge runs at 100-510 Ohms. The sender I have is one from GBS, http://www.kitspares.co.uk/shop/item.php?cat=10&product=4859&catsub=0 I will check the Ohm range of it tomorrow. Gray

Nick is this what I`m after http://www.autoelectricsupplies.co.uk/product/838 Gray

Hi Nick How are you doing? I have had this put to me before but to be honest I aint got a clue how to do it or what I need. Gray

Evening all This has been an on going problem for months now. I have bought a Koso digital speedo with an fuel sender Ohm range of 100-510. I am finding it really dificult findinga fuel sender in that range. Has anyone got any idears? Cheers Graham

lol :-)

Errrrr..yeah they are. Think I have found the awnser. The car is going on a rolling road in 2 weeks so we will see what happends. Thanks Florin Graham

Good point, yeah I did...filled it until it started dripping out of the filler hole.

Do you need to fit the spigot bearing? I dont think I put one in. Just a new fork and release bearing. Graham

Update Taken off the drive shafts this aft and run the diff. No knocking just the normal diff noice. If you hold the d/shaft and rock it back and forth there is a slight knock but is that just taking up the slack in the diff? It`s really hard to pin point the knocking as it seems to come from everywhere. Graham

I am nearing completion of my Zetec Zero build. I have put the car up on axle stands and run it through the gears, and there is a loud knocking noise from the rear end. I have checked the wheel bearings incase they were loose and tightened the hub nut up to 150lb, although my torque rench doesn`t go up to 300. Would this make the noise? Cheers Graham