Jump to content


Photo

Premier Wiring


  • Please log in to reply
12 replies to this topic

#1 jaimo

jaimo

    Wheely good builder!

  • RHOCaR 18
  • 1,702 posts
  • Location:south yorkshire / doncaster
  • Car type:robin hood exmo

Posted 04 February 2018 - 10:25 PM

Has any got some diagrams that they made or any instructions or tips etc for premier wiring pinto loom
As got one and trying to alter slightly and cant understand a fews bits such as in rear loom the fuel pump wire where does feed in loom/fuse come from and where best to take power from for drls ignition live and megajolt coil pack etc also ignition
Also changing fuseboxes to bigger ones
Also how and where do i connect output from alternator to starter solinoid to battery
Help

Edited by jaimo, 04 February 2018 - 10:27 PM.

Will it ever be a good runner ?

#2 florin metal works

florin metal works

    Hants & Dorset Area Secretary

  • Area Secretary
  • PipPipPipPipPip
  • 7,802 posts
  • Location:Salisbury
  • Car type:2B+

Posted 04 February 2018 - 10:44 PM

Alternator must not be connected to the solenoid --- it's connected to the starter feed cable which comes direct from the battery --- but you probably meant that.



#3 tractor

tractor

    tinckeritus

  • RHOCaR 18
  • 4,497 posts
  • Location:leicester
  • Car type:zero zetec turbo

Posted 04 February 2018 - 11:52 PM

i have a diagram somewhere will try and find it



#4 tractor

tractor

    tinckeritus

  • RHOCaR 18
  • 4,497 posts
  • Location:leicester
  • Car type:zero zetec turbo

Posted 04 February 2018 - 11:54 PM

i also got rid of the pwl fusebox and fitted the cbs fuse board and relay module 



#5 jaimo

jaimo

    Wheely good builder!

  • RHOCaR 18
  • 1,702 posts
  • Location:south yorkshire / doncaster
  • Car type:robin hood exmo

Posted 05 February 2018 - 05:31 AM

Yeah bob i meant that cable but join at starter end thats correct isnt it
Chris any diagrams etc brill

Edited by jaimo, 05 February 2018 - 05:31 AM.

Will it ever be a good runner ?

#6 tractor

tractor

    tinckeritus

  • RHOCaR 18
  • 4,497 posts
  • Location:leicester
  • Car type:zero zetec turbo

Posted 05 February 2018 - 07:05 PM

IMG_0011.jpg



#7 tractor

tractor

    tinckeritus

  • RHOCaR 18
  • 4,497 posts
  • Location:leicester
  • Car type:zero zetec turbo

Posted 05 February 2018 - 07:06 PM

IMG_0006.jpg



#8 tractor

tractor

    tinckeritus

  • RHOCaR 18
  • 4,497 posts
  • Location:leicester
  • Car type:zero zetec turbo

Posted 05 February 2018 - 07:07 PM

IMG_0008.jpg



#9 tractor

tractor

    tinckeritus

  • RHOCaR 18
  • 4,497 posts
  • Location:leicester
  • Car type:zero zetec turbo

Posted 05 February 2018 - 07:08 PM

IMG_0009.jpg



#10 tractor

tractor

    tinckeritus

  • RHOCaR 18
  • 4,497 posts
  • Location:leicester
  • Car type:zero zetec turbo

Posted 05 February 2018 - 07:09 PM

IMG_0010.jpg



#11 tractor

tractor

    tinckeritus

  • RHOCaR 18
  • 4,497 posts
  • Location:leicester
  • Car type:zero zetec turbo

Posted 05 February 2018 - 07:09 PM

couldnt find mine so had to copy this from locostbuilders 



#12 tractor

tractor

    tinckeritus

  • RHOCaR 18
  • 4,497 posts
  • Location:leicester
  • Car type:zero zetec turbo

Posted 05 February 2018 - 07:14 PM

when i fitted the CBS fuse relay board i realised that all i would be keeping intact from the premier wiring loom was the rear loom the CBS wiring module makes a rewire so easy  although i did end up adding a couple of extra 8way fuse boxes so actually some circuits have two fuses in them  


Edited by tractor, 05 February 2018 - 07:16 PM.


#13 jaimo

jaimo

    Wheely good builder!

  • RHOCaR 18
  • 1,702 posts
  • Location:south yorkshire / doncaster
  • Car type:robin hood exmo

Posted 05 February 2018 - 07:43 PM

Thanks chris i will hopefully beable to sort it from there but then again
Will it ever be a good runner ?