Bonnet Louvres

[Guest dctough]

Does anybody know someone who can punch louvres into a stainless steel bonnet around the Heathrow area? Things are getting a bit hot under the hood.

 

Dave

[fry61]

Think you may have trouble finding an engineering co. that can/will stamp more vents in an existing bonnet. When I fouled up my first bonnet I had to supply a flat sheet for them to stamp;then I made all the folds & curves.

[Bob Tucker]

many of us have fitted something like tis to the sides of the bonnet.....

http://www.ebay.co.u...ht_500wt_1127

 

Look a bit further & you can get them for about 1/2 of this price

 

Just found some...

http://www.marinesuppliesdirect.co.uk/5-louvered-stainless-steel-vent-710-p.asp

 

HTH Bob

[Snapperpaul]

Another option is to prop the rear of the bonnet open by 1/2"

[Guest mower man]

Try boat builders for louvered panels mowerman

[Guest Jut]

i fitted a small cobra scoop facing the screen. full gel coated then wrapped from ebay.

[richyb66]

Not sure if the details are still current (latest I have are from 2009 but the Lovelace Louvre Shop (working out of the Bare Bones Rod Shop) in Sunbury on Thames can punch them in existing panels

 

Probably worth a phone call as it's very local. Contact is Paul 07961 162265