2B Bottom Ball Joints

[ragey]

Hi All.

Could anyone tell me what the front bottom ball joints on a 2b are please

paul.

[Guest ant.b]

Hi All.

Could anyone tell me what the front bottom ball joints on a 2b are please

paul.

 

not more spending !!

 

here you go

http://www.kitspares.co.uk/shop/item.php?cat=16&product=4950&catsub=0

[richyb66]

Peugot 405 QH QS972S is you want to get them from a motor factors.

[fry61]

You may need to replace these after removing 'bones from car;used 24" stilsons & a lot of cussing to remove old ones on Florin; they were murder tight on the threads;supposedly because they were fitted hot at the factory. The new QH joints went in easily so a lock tab was essential.

[ragey]

Thanks chaps. yes ant more spending just sorting out a price for a 11 gallon tank . the ball joint in the pic doesnt look like mine, unless you have to strip them down. going to the nec at the weekend so going to try and but them there.

Paul.

[speedtripledan]

As bob said they are bleep to get out!!! I made a tool to go over the joint then used a 3ft breaker bar and swear words....

[Guest ant.b]

Thanks chaps. yes ant more spending just sorting out a price for a 11 gallon tank . the ball joint in the pic doesnt look like mine, unless you have to strip them down. going to the nec at the weekend so going to try and but them there.

Paul.

well as you know everything is different on your car for some reason ! post a pic of it

[ragey]

ill take a picture tomorrow, ye it does seem like its a one off sometimes but i dont help, my balljoint bolts to the bottom wish bones

[fry61]

Wasn't it the Cortina ball joints that bolted on with 3 x M8 bolts; if so above info is not correct ; but then this info may not be either.

 

Pictures before spending money methinks!!

[ragey]

ant tolm to look on fleebay at mk3 cortina balljoints and they do look the same cheers ant

[Guest mower man]

If your local factors are any good they probably have them in stock