Bottom Wishbone Bracket

[colinmoore]

There you go Alan, you've just got room to add an 8mm bolt to the right side of the central one, this will stop any possibility of the angle bracket rotating.

[Guest jelleyhead]

Alan,

Your bottom bracket is flush with the bottom plate at the back Mine is more in the middle.Just out of interest where is the bottom front wishbone bolted ? is it the same as mine?

[alanrichey]

Yes, identical

[Guest jelleyhead]

Just an update. I have just got around to making some new brackets for the bottom wishbones .

I have gone for 5 MM Steel just to give me some extra support and two M10 bolts.

Just got to get them painted and get them on the car. I have also replaced all the bushes as after my problem it had damaged the bottom ones .

[agent_zed]

i'm sure you have but just to mention to make sure the bush is not clamped tight. The sleeve should stick out a mm and be the bit that is clamped tight so the bush can move freely.

 

looks a good job though can't see them moving out of place in a hurry