Jump to content

(SOLD) Robin Hood 2B for sale


Brian P
 Share

Recommended Posts

NOW SOLD

We're sorry to see our Robin Hood 2B go, but we're just not getting the use out of it that it deserves. Great fun to drive, of course, and a real head-turner.

Location: Sutton Coldfield, West Midlands

Robin Hood 2B Wishbone, SVA'd 2009  -  £4,500 ovno

2Ltr Pinto, 5 Speed Type 9 Gearbox

Oxford Blue GRP and Mirror finished Stainless Steel

Mild Steel Chassis

1741 Miles

MOT until April 2022

Correctly Registered as a ‘Robin Hood – rebuilt – assembled from parts some or aal of which were not new’. See description below for new parts used.  With correct age-related number plate.

Exterior

Wide front wheel arches to accommodate 205 tyres

Super-spec all GRP rear arches

Fixed scuttle with DZUS fastened separate nose and bonnet

Full windscreen, mini wiper system with chrome wipers and arms

Suzuki GSXR mirrors

15" MSW by OZ alloy wheels with Bridgestone Turanza 195/50 R15 82V tyres.

5 3/4" Halogen headlight in chrome holders.

Vinyl wrapped, Aluminium lockable boot cover.

Chassis integrated roll hoop (Gloss Black)

Interior

MGF Full leather seats (both on runners)

Sabelt 4 point harnesses

Smiths chrome bezeled gauges, Speedometer, Rev counter, Volt, Temp, & Fuel gauge. An oil pressure gauge is also fitted but not connected.

Individual dash warning lights

11" Mountney steering whee

Short shift gear lever

Mini heater control

40ltr Stainless Steel Fuel Tank

Carpet Lined Boot with decent capacity

Engine

2ltr Pinto, 205 Block (the best engine to bore out to 2.1Ltrs).

4 into 1 Fully Chromed Manifold, Exhaust heat wrapped and sprayed silver

Custom Chrome ‘Chromozone’ re-packable Silencer

Silicone HT Leads

ITG Air Filter

Samco High Performance Water Hoses with Stainless Steel Inserts

Shortened sump

Adjustable automatic fan switch

 

When constructed the following items were fitted and, obviously, have had little use:

Engine

 

New Water Pump

New Alternator

New Cambelt

New Clutch

Brakes & Suspension

New Front Brake Calipers, Disks & Pads

Reconditioned Rear drums with new Shoes and Cylinders

New Master cylinder

Stainless Steel Braided Flexi Brake Hoses x4

Adjustable Coil-over Shock Absorbers x4

2.4 Lock to Lock Steering Rack

 

DSC_0005.JPG

DSC_0032.JPG

DSC_0007.JPG

DSC_0033.JPG

DSC_0031.JPG

DSC_0009.JPG

DSC_0010.JPG

DSC_0012.JPG

DSC_0014.JPG

DSC_0028.JPG

DSC_0016.JPG

DSC_0017.JPG

DSC_0027.JPG

DSC_0019.JPG

DSC_0026.JPG

DSC_0021.JPG

DSC_0034.JPG

DSC_0035.JPG

DSC_0036.JPG

DSC_0037.JPG

DSC_0038.JPG

DSC_0039.JPG

DSC_0040.JPG

DSC_0041.JPG

DSC_0042.JPG

DSC_0043.JPG

DSC_0044.JPG

DSC_0045.JPG

Edited by theduck
Added location info
Link to comment
Share on other sites

16 hours ago, Brian P said:

We're sorry to see our Robin Hood 2B go, but we're just not getting the use out of it that it deserves. Great fun to drive, of course, and a real head-turner.

Robin Hood 2B Wishbone, SVA'd 2009  -  £4,500 ovno

2Ltr Pinto, 5 Speed Type 9 Gearbox

Oxford Blue GRP and Mirror finished Stainless Steel

Mild Steel Chassis

1741 Miles

MOT until April 2022

Correctly Registered as a ‘Robin Hood – rebuilt – assembled from parts some or aal of which were not new’. See description below for new parts used.  With correct age-related number plate.

Exterior

Wide front wheel arches to accommodate 205 tyres

Super-spec all GRP rear arches

Fixed scuttle with DZUS fastened separate nose and bonnet

Full windscreen, mini wiper system with chrome wipers and arms

Suzuki GSXR mirrors

15" MSW by OZ alloy wheels with Bridgestone Turanza 195/50 R15 82V tyres.

5 3/4" Halogen headlight in chrome holders.

Vinyl wrapped, Aluminium lockable boot cover.

Chassis integrated roll hoop (Gloss Black)

Interior

MGF Full leather seats (both on runners)

Sabelt 4 point harnesses

Smiths chrome bezeled gauges, Speedometer, Rev counter, Volt, Temp, & Fuel gauge. An oil pressure gauge is also fitted but not connected.

Individual dash warning lights

11" Mountney steering whee

Short shift gear lever

Mini heater control

40ltr Stainless Steel Fuel Tank

Carpet Lined Boot with decent capacity

Engine

2ltr Pinto, 205 Block (the best engine to bore out to 2.1Ltrs).

4 into 1 Fully Chromed Manifold, Exhaust heat wrapped and sprayed silver

Custom Chrome ‘Chromozone’ re-packable Silencer

Silicone HT Leads

ITG Air Filter

Samco High Performance Water Hoses with Stainless Steel Inserts

Shortened sump

Adjustable automatic fan switch

 

When constructed the following items were fitted and, obviously, have had little use:

Engine

 

New Water Pump

New Alternator

New Cambelt

New Clutch

Brakes & Suspension

New Front Brake Calipers, Disks & Pads

Reconditioned Rear drums with new Shoes and Cylinders

New Master cylinder

Stainless Steel Braided Flexi Brake Hoses x4

Adjustable Coil-over Shock Absorbers x4

2.4 Lock to Lock Steering Rack

 

DSC_0005.JPG

DSC_0032.JPG

DSC_0007.JPG

DSC_0033.JPG

DSC_0031.JPG

DSC_0009.JPG

DSC_0010.JPG

DSC_0012.JPG

DSC_0014.JPG

DSC_0028.JPG

DSC_0016.JPG

DSC_0017.JPG

DSC_0027.JPG

DSC_0019.JPG

DSC_0026.JPG

DSC_0021.JPG

DSC_0034.JPG

DSC_0035.JPG

DSC_0036.JPG

DSC_0037.JPG

DSC_0038.JPG

DSC_0039.JPG

DSC_0040.JPG

DSC_0041.JPG

DSC_0042.JPG

DSC_0043.JPG

DSC_0044.JPG

DSC_0045.JPG

Where are you please

Link to comment
Share on other sites

  • 3 weeks later...
  • 1 month later...
  • 1 month later...
  • theduck changed the title to (SOLD) Robin Hood 2B for sale
  • theduck locked this topic
Guest
This topic is now closed to further replies.
 Share

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...