Steve0

Now gone

Rear lights and number plate surround one of the indicator lens has a crack in it but is water tight and has passed several MOT'S without any problems they measure 100mm diameter i have replaced with LEDS am looking for £20 for the whole lot plus postage

Free to collector in need of painting and repair i got these with the car when I brought it sy be of use to someone

Hi DoctorDee Spoke to him yesterday AM he said send him my old one he would see if he could repair it ,if not he could make a new pair he has a 7week turn around at the moment

Thanks for that, fingers crossed

Hi Peeps My EXMO has just failed it's MOT on a failed front shock, i am struggling to to find a replacement i know people say they are inserts from P100 fords but what model i have removed the faulty one from the car and separated it from the sping adjuster it measures 280mm from the collar to the bottom of the shock not including the ram and 42mm diameter any help with this would be much appreciated any options would also help SteveO

Hi Ian I take it the tank needs emptying to achieve this will give it a go this weekend Many thanks SteveO

Hi Everyone Just brought my 2nd Robin Hood need some advice it has a smiths fuel gauge and a sierra sender the gauge shows below empty even with fuel in it is there a compatible gauge for the sender as i do not want to be messing around with the tank or any other options Thanks Steve

Thanks for that I'll give it a go

Good shout

PM SENT

Ah ok ill have a look when i get home

just to add the one that came from it was held in with one bolt and the locating ridge had been ground away to enable fitting

Hi Everyone Need some help with this one i have a 2litre pinto with what i believe is a MT 75 gearbox and the starter motor has decided to pack up i am struggling to get a starter for it,the 3 mounting bolt holes are 70mm centre's in a straight line and 100mm across the diagonal 2 if anybody could supply one or let me have a part number for said item that would be great, failing that would a type 9 bell housing fit on the MT75 Gearbox any other ideas greatly appreciated Steve

Hi Dean Sorry it's been a while i have decided to ditch the windscreen and all that goes with it l have got some Brooklands sceens now as it is only a sunny day car All the best Steve

Sorry Mate haven't got round to getting pictures just got the old girl running after a complete rewire will do in the week

Ok I'll whip them off later today get some pictures and forward them and see what you think

Hi Dean I'll get some pictures of mine or could post mine to you to see if you can replicate them i will of course pay postage both ways and any time you spend on them Kind Regards Steve

Hi All Hope everyone is keeping safe and well Just wondering if anyone has any decent windscreen brackets kicking about for an exmo as mine have more holes drilled in them than a cheese grater or anything that might fit Regards Steve0

Have you managed to get a cover yet ,i am rewiring mine this winter with a new loom so have cover if you are still interested SteveO

Hi All. Has anybody out there got a reasonable carpet set for my RH EXMO preferably black in colour i am located West Sussex, i am often travelling during the week so collection might not be a problem, thanks in advance Steve

Many thanks for your advice guys its up for MOT next Saturday, DanDan62 i am in Chichester

Good Morning All I have just picked up my first Robin hood and am looking to put a set off twin Dellortos/Webers do i go 40s Or 45s it has the 2ltr pinto sierra engine SHOC i would also be putting a fast road cam in it at some point it has been unloved in its previous life but has now found a new lease of life is there anybody on the south coast West Sussex/Hampshire out there who owns one for info Regards Steve