Jump to content
Getting There

Breaking A Robin Hood 2b

Recommended Posts

Hi

 

After the accident last year, I am finally able to split the parts from the car. The car had completed 5000 miles at the time, and is a 2B wishbone.

 

Gaz Shocks Front pair 375lb 9" springs - £100

 

Front End, wishbones, dummy struts, mud guards, steering rack, coolman rad (has a prof repair done), checked against another 2B and it is straight and fine, will cut the chassis at the welds, may replace the front end of a sliding Pillar? - £120 - Sold Steve Wilson

 

Prop Standard Robin Hood regularly greased - £20

 

Injection setup, lowered plenum, injectors, fuel pump, dizzy, air mass meter, ECU, wiring - £130

 

Exhaust stainless 4into1 with standard Robin Hood silencer £80

 

Mirror Set Carbon Fibre look wing mirrors, and small internal mirror (all cost £60 new) - £20

 

front Indicators on extenders (Passed SVA) - £15

 

Fox 15" racing Wheels, with Toyo Proxes on 2 5mm tread, and Goodyear on 2 5mm tread set of 4 - £100 - Sold Stuartl

 

Front Headlamps with H4 lenses and seperate side lights - £25

 

Shortened Sump with 4mm steel sheet and extra capacity pot and pick up pipe - £50 (May be a delay on collection as will go with the engine and will need to get in back) - Sold Dave R

 

Cobra Daytona Seets in Black, with Sabelt 4 Point Harnesses, in OK condition, has damage to the base sides, but cant be seen in a 2B - £40 - Sold steve Wilson

 

Dashboard and Tunnel cover (foam padded, covered in black vinyl), inc Sierra clocks - Donation to Hoody Fund

 

Pinto Engine & Gearbox - £30 - Sold to Grizzly

 

I need the standard parts to go onto the new chassis, so they are not for sale. Any other parts that are wanted; please PM me, they are free to a good home, although a donation to the Hoody Fund will be encouraged!!

 

If any one wants any of the items please reply below, then send me a PM, then everyone knows who got first dabs on things. I would like these to be collected from Huddersfield, West Yorkshire, although I will be at Exeter show, and can stop en route to meet.

 

The parts will be removed over this weekend. I will give the Rhocar Members first dabs on thing, what is not sold on here will be listed on Ebay next weekend. Pictures availlable on request.

 

Many Thanks

 

Chris

Share this post


Link to post
Share on other sites

hi there,

 

i'll take:

 

the front suspension setup

seats + harnesses

could also be interested in the shocks too

 

Cheers, Steve

Share this post


Link to post
Share on other sites

ooh am very interested in some of these parts

mirrors and sump

 

PM sent

 

Dave

Share this post


Link to post
Share on other sites

Doh, Just saw that Dave beat me to the sump :(

 

Can you give me first bags on the wheels and a pic of them please??!

Share this post


Link to post
Share on other sites

Any chance u could PM me or put up a picture of the head lamps? Soz but what does H4 lenses mean???

Share this post


Link to post
Share on other sites

Hi

 

The H4 is the type of bulb, instead of the sealed beam which have to be replaced when the blow, just replace the bulb (bulbs are the same as a normal 12v car). The lights are the same as fitted to most 2B's, I will take a picture and PM it tomorrow.

 

Cheers

 

Chris

Share this post


Link to post
Share on other sites

Can I have the bolt sticking up out of the road on the manhole cover !!!!!!! :spiteful:

Share this post


Link to post
Share on other sites

Chris,

 

Thanks for the text!

 

The news of your accident in the car was obviously reported prior to my time on RhoCar.

 

What happened?

Share this post


Link to post
Share on other sites

Yeah if you want!! Will bring it to the meeting in a few weeks!! £100 OK?

 

see you in a bit

 

Have Fun

Share this post


Link to post
Share on other sites

did it all get settled in your favour?

 

Any rear shocks available?

Share this post


Link to post
Share on other sites

Hi

 

Sorry but the rear shocks went to a good friend, otherwise would have gladly sold them to you.

 

With regards to the accident when it is all finally closed, I will post on here as it will help if anyone is in a similar position, but at the moment I have to put a signature on the bottom of some paper next week then it is sorted. Just dont want to post on a public forum until I know that its fully closed.

 

Cheers

 

Chris

Share this post


Link to post
Share on other sites

Hi chris , i will be along tommorow with my socket set to start the debuild , i will ring you when i finish work should be about 11 am ish . see you later . justin.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...