Jump to content

Sebring Project


femster87

Recommended Posts

  • 3 months later...

Test drove a ginetta G40 tonight. Darty as they get but stupidly fun. Was surprised at the pace. Got to have one now.

 

Anyways on the Sebring, we had a bit of progress glass fitted. Thanks Marcus for the contact

New ultra expensive uprated drive shafts fitted

 

IMG_20160511_103559025_zpsxw8hmh3r.jpg

 

IMG_20160511_103526840_zps7so3zp2p.jpg

Edited by femster
  • Like 2
Link to comment
Share on other sites

Bit more progress,wiring gone in needs terminating. Dreading wiring the dash in. Should really get one with it.

 

I installed the fuel tank. I think it is too bright. It will be sent off for powder coating next week. I just have to sand it down before sending it off.

IMG_20160516_122302713_zpsnsczeyyx.jpg

I also had the bonnet locating dowels turned down and installed.

IMG_20160516_121515433_zpspzfbsxm8.jpg

The perspex screens have now been cut and installed for the windows

 

IMG_20160516_121501961_zpsubcyk3h7.jpg

No more update this week. Silly work is in the way

  • Like 2
Link to comment
Share on other sites

  • 2 weeks later...

Lazy weekend. Bit of a progress.

 

Goody box arrived and i set about fitting it.

 

WP_20160528_11_37_43_Pro_zps16f31cfg.jpg

 

WP_20160528_11_48_20_Pro_zpslfd1nmuc.jpg

 

Had a trim laser cut in aluminium and rolled to the curve on the door. Fits over the door opening dooda

 

WP_20160528_13_13_12_Pro_zpsqwiptk8z.jpg

 

Had a few minutes of stupidity with the hammer and formed the end of the fuel pipe. I will have it trimmed and welded on this week

 

WP_20160528_12_34_51_Pro_zpsyaqgibwk.jpg

 

WP_20160528_12_34_40_Pro_zpsgvoy8e91.jpg

 

WP_20160528_12_24_08_Pro_zpsya4sgubh.jpg

 

I then fitted all the brake lines

 

WP_20160530_07_54_46_Pro_zpsp42oxky4.jpg

 

Enjoy until next time

  • Like 1
Link to comment
Share on other sites

  • 2 weeks later...
Guest 2b cruising

Would you kindly just hurry up with this build.

I've got nervousness tension having to wait to see it in the flesh.

Link to comment
Share on other sites

Would you kindly just hurry up with this build.

I've got nervousness tension having to wait to see it in the flesh.

I know, everyone has a car on the road and i am crawling on the floor in the shed. Anyways i did a bit more today. A lot of wiring really. Not much to see.

 

ECU and fuse boxes gone in. front headlights and rears routed and terminated. Going to try and finish the Dash wiring tomorrow.

 

WP_20160611_15_08_03_Pro_zps985uihif.jpg

 

I also fitted the side mirrors. Think they look okay. A bit small but they work okay and look smart

WP_20160611_15_07_51_Pro_zpsek9avrm2.jpg

 

WP_20160611_15_08_30_Pro_zpsgkkfzmss.jpg

 

I also ran the fuel line and the return. More wiring tomorrow, complete clutch lines and start wiring in the engine bay.

Link to comment
Share on other sites

  • 4 months later...
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...