Jump to content
Sign in to follow this  
Paul Philpot

For Sale

Recommended Posts

Robin Hood 2B


New project due to start shortly so she has to go to a good home.


She needs a new speedo but apart from that...



Built in 2002 from 1987 Sierra donor car.

Red with stainless steel body.

2 litre Pinto with single twin choke Weber carb.

4 into 1 exhaust.

Correctly registered on V5 as Robin Hood 2B


Electronic cooling fan override.

GBS chassis.


Converted to manual choke.


Carburettor stripped and cleaned (August 2016).

New clutch cable (September 2016).

New front brake pads (April 2016)

IGS air filter.


Mountney leather steering wheel

Sierra Pepper Pot wheels with excellent tyres.

Leather Cobra seats (drivers adjustable).

4 point harness (driver and passenger).

Classic instruments.

Push button start.

Auxiliary socket.


Milometer shows 7800 miles but it is nearer 9000 miles.

Weather equipment: hood and doors.


Lockable boot.

Lockable petrol cap.

MOT until March 2017 (no advisories).


The car starts on the button, sounds gorgeous and runs really well. The car has been used regularly, not laid up or SORN’d. It has been kept in a dry garage since the day I bought it.


Pictures to follow


£3300 (Gatwick Airport area),


Call: 07954 168546 or Email: paul.philpot@yahoo.co.uk




Share this post

Link to post
Share on other sites



i've been offered a Caterham for a good price


You will regret it........LOL

Share this post

Link to post
Share on other sites



Sad in some ways but delighted that she's gone to an enthusiastic new owner who I know will get as much pleasure out of her as I did. It is a lovely little car, basic 2litre Pinto with just a carb modification.


I've already had 2 phone calls from friends asking who was driving my car down the lane this afternoon.


Good Luck Wayne. (new owner)

  • Like 3

Share this post

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By George Laing
      For Sale 
      Robin Hood Polished Body Panels - inc. side panels, cockpit, rear petrol tank cover, rear light surrounds etc. good condition - will come up nice with a bit of elbow grease. 
      various narrow and wide wheel arches (will need repainting) 
      i prefer the skeletal look. 
      £200 ono for the lot 
      Collection only Snaith (Selby/Goole area) 

    • By raeautos
      Check on preloved website
    • By Spats
      Hi, I bought an old 2b with sliding pillar partially built - 2 years ago. Lots and lots done, basically rebuilding the entire car, bit of an engineering project!! and we have just completed a GBS wishbone suspension rebuild on the front and replaced the damn awful pillar suspension! The car currently has a mg metro steering rack on that we have removed. I want to go to a ford rack to match the sierra track rod ends and extenders we now have. Would a mk2 escort match or what have other members fitted? Any help would be appreciated
    • By Tweedy
      I'm putting my 2B+ up for sale as it is getting so little use.
      The kit was purchased in September 2005 and the car was completed in February 2008. It passed the IVA test first time on the 8th of February 2008.
      The car is registered as a Robin Hood and is on a Q plate.
      The current MOT expires on the 30th of July 2018.
      The engine is a Sierra 2L DOHC fitted with a Weber 28/32 TLDM carburettor and a Motocraft engine management system.The fuel tank is aluminium.The gearbox is an MT75.
      Full weather gear is included.
      The bonnet is hinged in front of the windscreen.
      Wheels are 15x6 alloys fitted with Yokohama 205/50 tyres.Suspension is via Gaz adjustable coilovers.
      ETB gauges were fitted in November 2010 together with a birch faced dash.
      Engine cooling is is via a Coolman radiator and electric fan.
      Sabelt safety harnesses are fitted and a fire extinguisher is included.
      A new battery was fitted last year.
      A jack, spare fuel pump and engine management module are included.
      Price £3000
      Let me know if you require further details.

    • By Simon Parish
      Well its come to that time when I have made the decision to sell my 2B.

      So here goes:

      Its a Robin Hood 2B with a 2L Pinto engine with an injection head.

      It Has ZX9R bike carbs on a Danst Engineering Manifold

      Type 9 5speed gearbox and sierra rear end.

      Martin Keenan Custom built Silencer - giving it a sweet noise and put a smile on your face each time you start it

      It has Full weather gear that fits

      Has a set of 5 Uniroyal Rain sport 3 tyres that have done around 400 miles since fitted last year ago.

      There are numerous other spares that will be sold with the kit. These include a Front Geometry kit purchase form GBS for the vehicle but never fitted, A brand new set of GAZ shocks that are still in their boxes.

      The paint on the body is flaking in a few places, but its superficial, just a rub down, some primer and a respray and it will be as good as new

      The log book is correct and its registered as a Robin hood 2B
      Its MOT'd until April 2018. Its covered 16,708miles
      I'm looking for £3995

      I'm located in Crawley - will answer all questions and anyone who wants to view the kit with an eye to buy is welcome

      Picture of the kit are here:

  • Create New...