Jump to content

newbie

RHOCaR Member
  • Posts

    16
  • Joined

  • Last visited

Posts posted by newbie

  1. Hi Newbuyer, Sorry for the delay - holiday. 

    Cars on the road:out in it this morning!. Runs fine no real problems MoTed until 6th July 2025 but MOT is moot point now as I’ve successfully registered it as ‘Historic’  - means no Road Tax & with ‘optional’ MoT (but it still needs to be roadworthy).

    Cabin is just looking tired. Carpet shampooing would help but I was thinking of getting some new seats. The wet weather gear hood & doors have hardly been used. I’ve never taken it out in the rain in the 10 yrs I’ve had it.

    Photos: Easiest if you email me & I will send you some Cabin photos.

    Regards

     

     

  2. IMG_0054.jpeg.c42627d30c0b7468759f05cbb72993ee.jpegIMG_0052.jpeg.75fad70e01e3b64361c9bc1017c49cdb.jpegIMG_0057.jpeg.4a20fc92977be80ebaf409e73471e869.jpegIMG_0068.jpeg.9e18192a83d1892cd33e921ed9ff9098.jpegSadly after a new knee op it’s time to move on my lovely S7 Mk2 after 10x fun years. Seats & internal trim need a bit of TLC but it’s on the road MoT July 2025.

    V5 registration as Robin Hood 030184 , build docs, Vehicle Inspection Report dated 060696. ‘Historic’ no road tax car on application.

    2.0 litre Pinto, Ford Type3 gearbox, 38 DGAS Carburettor, Brakes refurbished July ‘24, Sierra instruments. Full wet weather gear included.

    £3250 ono  (newbie 07773459052)

     

     

  3. Hi Daled, Sorry to be so slow off the mark but how did your sale go? My S7 is getting in need of some TLC & I’m undecided as to tackling that or perhaps buying something different. So, is yours still on the market?

  4. Hi Dave,

    Yours looks like an original Sierra sender. I’ve just changed mine as it was leaking fuel from the uptake pipe braze. However, I agree with The District Sec - if you can , leave it well alone. It is very hard to reseal. I managed eventually by using a manufactured steel ring over all x4 bolts to apply a more even pressure to the gasket.

    Try recalibrating your gauge with a Spyider module ? You wouldn’t need to remove the sender.

  5. Hi, My Super Seven 2l Pinto has just developed a serious 'clunk' when releasing the clutch. Changes gear & clutch drives OK but heavy clunk just as the peddle presure is released. Seems to happen more often when its hot. Does this sound like a cable/quadrant problem too?

    Regards

×
×
  • Create New...