Redspec

Some pressure regulators will only work if there is a demand from them ie. a flow, if the engine is not running just slacken of a joint in the return line with a catch tray under it to catch the drips and try again. It only needs to be a drip, enough to loose pressure. I may be wrong but worth a try. (Have had the same problem with air regulators) Steve

M10 x 1mm pitch if you are on about threaded fittings HTH Steve

You can fit one of these (it just replaces your flasher unit), It will work with both normal bulbs and LED's mix and match use both together. NOT like a normal LED flasher unit that will die if you put a normal bulb in the system. http://www.triumph-online.co.uk/dual-load-led-flasher-unit-flash-rate-fix-led-andor-filament-bulb-2263-p.asp HTH Steve

Hey leave my wife out of this Then I woke up

You need a pre pump filter as the injection pump does not like " little bits of crud" and will fail ( ask Longboader) Steve

Parallel otherwise you will only have 6v at each of the the lamps. Steve

Cheap glass cleaner Give it a wash then remove water marks with said cleaner works fantastic HTH Steve

Thanks, just looked on e-bay and they are not listing any items at the moment but found these http://cgi.ebay.co.uk/50-neodymium-disc-round-magnets-6x3-mm-reborn-craft-/140413882086?cmd=ViewItem&pt=UK_Dolls_Accessories_RL&hash=item20b151cee6 So I have taken out a bank loan and now have 49 spare:unknw: Here's me thinking I would have to go to ETB or whoever and pay about £5-00 each + p&p Any one want a spare or 2 just send me a stamped addressed envelope Thanks Again Steve

Hi all I'm sure I've read on here (but can't find the post) some one had spare speedo magnets. Anyone got one (or 2) as I lost one at the weekend. Beer tokens waiting. Just thought I would ask before searching for some. Cheers Steve

Great weekend, what more can I say, apart from thanks to Ian for organising things. Steve Ps And to the hoard of bikers looking for love that provided some interesting topics of conversation:give_rose:.

?

Don't know if this will effect our meeting place http://www.visitmasham.com/calendar.php There is a Special Yorkshire Fayre on? See you all at the market place (if I can get parked) LOL Steve

Is that a swop for the Lotus Steve :diablo:

Yes for either Ian Thanks Steve

Shackles, but why not just lift off the eye's, Try fleebay Steve Must type faster Must type faster Must type faster Must type faster

150 hp standard but stll not bad

Hi Graham as you know I am very interested in going to the 2011 event, being a Le mans virgin I will go along with peoples greater knowledge. I would rather go to a site that it is easy to get to the track though as I hope to take the Hood and therefore a bike is out of the question, money is not a critical point within reason, so if the a better option is only a few £ more then I don't mind I'll just have to drink less and eat beans for every meal . See you soon Steve

Hi Jeremy A roll pin is like a tube with split in it going along it's length, as you knock it in the split closes up and friction holds it in place. HTH Steve

Looks like it, and they are only at bells close ind est, might be worth asking if they can repair the coolman as Andy say's, they did my air con a couple of years ago and were very helpful. Steve

Hi Paul, Got a polo rad here if you want to check it for size, it looks very wide for the nose cone (not got that far yet) Can you not solder up the coolman hole??? Steve

So Andy, if the DVLA get there finger out, we will see it at Tan hill then Good luck give me a shout it you need anything (would come up over the weekend but we have family comming up ) Steve

Ejector seat

There you go Grizz http://www.bghgeartech.co.uk/html/5_speed.html Steve

It looks like those are the prices before discount Steve

I had a fast idle problem on mine and it was the brass ring on the end of the throttle cable shroud that was jamming it open a bit (at the throttle body end). 1) Try and disconnect the throttle cable at the throttle body end and run it with no cable. 2) Check for air leaks / split hoses on the inlet manifold (spray brake cleaner etc around the joints etc and listen for a change in engine tone) If non of the above work get back to us and we will look into it a bit deeper Steve PS put in your location you may have a hoodie in the next street that can help