stevedohc2b

It is here the new light weight. Stephen

Rear view The wheels turn by using cocktail sticks as axles.

The Weigh in. Only 14 grams a true light weight

I have finally finished building my new light weight. The build has proceeded very quick indeed. It is truly a light weight as a shot of the scales AT the SVA test will show. See the first pics here Stephen Hope you like her

Andy I have just printed out will give it a go. Just like building a Robin Hood except paper is easer to fold and it is not laser cut ready for you. Stephen

Graphic Reproduction Department Manager. I now work with Apple Mac's and PC's all day as printing is now all computerised. When I started I used my hands a lot more as you had to cut and stick films together and the photographic processes were used a lot more. As I was in to Photography this was enjoyable. Getting my hands dirty Building the car gave me back the doing it with your hands satisfaction again. Print is all so well Paid. Stephen Altwasser

Have a look in the car manual at different dashes for that car and you will probably find one with a rev counter. Now visit the scrap yard pull one out and replace. Will look as good as new. Dash will look original and not affect resale value so much, no holes etc. Stephen Altwasser

Chris it did go to Lemans IT was in the car then have changed recentley NOV2004. Got to do some work now. stephen

chris here is the complete loom as removed from donor. http://www.stevedohc2b.freeserve.co.uk/loom.jpg I made lables on the pc about 105 mm x 20mm so filled a page of A4 with them laminated the face and double sided on the back then cut out and stuck around loom. Clear and water proof. I had hoped to fit the abs but could not fit the servo and bits under bonnet. The proper place to lay the loom out see pic http://www.stevedohc2b.freeserve.co.uk/loom1.jpg Stephen Altwasser do not now what happend there serpos to be working night shift

chris here is the complete loom as removed from donor. http://www.stevedohc2b.freeserve.co.uk/loom.jpg I made lables on the pc about 105 mm x 20mm so filled a page of A4 with them laminated the face and double sided on the back then cut out and stuck around loom. Clear and water proof. I had hoped to fit the abs but could not fit the servo and bits under bonnet. The proper place to lay the loom out see pic http://www.stevedohc2b.freeserve.co.uk/loom1.jpg Stephen Altwasser

I would say the ABS computer that was where mine was. see atached pic/ link this is the loom for it removed, has a big green plug. http://www.stevedohc2b.freeserve.co.uk/removed_abs_loom.jpg

Graham what have you done now? I have my old MT 75 sat in my garage all ok ecept it made a noise in 5th on over run. Missing the fill plug. All yours if you want it. I am working nights this week. Stephen Altwasser

Well done Tim great. Stephen Altwasser

I am up for it if it looks nice as I wanted to take the car out today and did not. I Like your videos how about an earlyish start and some filming/ pics on some nice bendy roads. Stephen Altwasser

We nearly ate her for lunch.

Happy Christmas Stephen Altwasser

Andy You could fit the canoe in the back and My tools as well Stephen

So here it is again me getting my tools out. This contained trolley jack, 5 liters fuel can, Large socket set, first aid kit, tow rope, spare bulbs, sealed beam head light, test meter, roll of ring spanners. Ratchet ring spanners, bottom ball joint, top ball joint, warning triangle,102 piece tool kit, torch. 2nd jack, Bottle of water, an assortment of electrical connectors, bars leek, Sierra manual, flashing reflective warning triangle, 20 litre jerry can, spare wind screen, Polish and cloths, shock absorbers spanners, pack of isopon P50 fiber past, White cotton gloves to keep hands clean. And the back up Ranger Rover with camping gear and beer. With full Rac cover as well. Good job we did not need any of it. Stephen

I am usualy the one with his hand up the turkeys bum on christmas morning in our house. I will have to have a good look 1st this year!! Stephen

Check your Turkeys before taking them home. SEE PIC STEPHEN

Thanks all it was a great night John, Helen, and Mel. for the awards. Glad you liked the wine. stephen ( WEE WEE)

In light of my SG7 Award I have changed my avaitor. Thanks John And crew. Stephen

Hi lads they must be geting use to robinhoods at LB by now as mine passed 2nd time last oct. They do not like the aligator bonnet though. "(The one thing that shocked me when I told the inspector it was a Robin Hood I was building was his comment, that the are not the best built kits. I suggested he meant designed. His reply was has it got one of those alligator bonnets, no I replied. They are dangerous and should be banned, with a front impact the two bolts which it pivots on will snap and the whole thing will cut your head off. A very valid point.)" well done Now enjoy All the best Stephen

I have Three 7" RHS sealed beam Head lights for sale as I have up graded my ones. one brand new still in box brought as a spar. £15+PP the lot I am in Herts or post Tel 01442 248812 evenings please. Stephen Altwasser

A GT 40