Pedal Box

[tractor]

tried to put my pedal box together today purchased from g.b.s no instructions for assembly does anybody have a picture to atleast give me clue please

[knights_templar]

there's diagrams on their forum

[tractor]

thanks for the picture Richard that explains a lot I think I will have to contact gbs because I orderd as advertised a replacement pedal box for 2b quite clearly the box I have is for a box section chasiss and a 2b is tuebular this is the second time I have orderd parts from gbs and they haven't been as advrertised I now some adjustment is required er the bushes are the wrong size and the welding and the non existent finishing of the product is dissgracefull

[philshelton]

there's diagrams on their forum

Thank you Simon its always good to get a bit of input from the factory

[Snapperpaul]

I thought 2b used Sierra donor pedal box?

[tractor]

yes it does but gbs sell wot is listed as a replacement for the 2b pedal box but wot they have sent Is for a box section chasiss and 2b is tube as I said I expected to have adjustments to do but half the kit needs completely refabricating

[tractor]

got the hump as well whent to do trial fitment of zetec today put spigot bearing in fitted flywheel great getting somewhere whent to fit clutch not a hope must have wrong flywheel

[knights_templar]

got the hump as well whent to do trial fitment of zetec today put spigot bearing in fitted flywheel great getting somewhere whent to fit clutch not a hope must have wrong flywheel

 

was it supplied with the engine?

[speedtripledan]

Tractor you are right its a pig to fit, but do able took me 2 days to fit to my 2b. the main thing you will need is some 3mm plate to fit to the chassis to then fit the pedal box to assuming you have what i had then you will need some bracing at the top.

[tractor]

hi first answer no I got the flywheel separate was told it was off a 1.8 zetec and a modified pressure plate from elsewhere I know pressure plate is correct . hi dan yes it will take a lot of alteration to fit h box from gbs not only extra braceing to chassis but to the kit they have sent as well so I think it will be far better to get a floor mounted box

[speedtripledan]

 

the support brace in the pic was changed before i finished it but shows the basic way i did it