Pinto Down Draught Carb

[theduck]

I'm after a pinto down draught carb 32/36 would be ideal but will consider anything that will run on a 1.6. Must have manifold and linkages.

 

What have you?

[theduck]

still after a 32/36, manifold and linkages not essential now.

[FERRINO]

This carb came with a load of parts with the part built 2B I bought. The car had a 1.6 pinto engine fitted (minus carb as you can see in the pics) so I assume this carb is for the 1.6?

 

I don't know if you can identify what it is from the pics but you're welcome to it if it helps? I'll nip out in the morning and see if it has any markings on it if you like?

 

Cheers

Tony

 

 

 

 

 

 

[Longboarder]

Another DFTH. If it's for a 1.6 it would be a 28/30 but it looks more like a 30/34 for a 2.0L as it has the electric choke. ID may be stamped on the side of the lower flange where it mounts to the manifold, area in red. (Or of course on the ally tag!)

 

Nigel

Edited April 7, 2014 by Longboarder

[theduck]

Really just looking for a 32/36 now as it will also suit my post IVA plans.

[richyb66]

Give me a call when you've got a minute.