Engine Mounts

[Guest Griffgriff]

Hi, could anyone help me with info on the best place to get engine mounts for a Zetec black top in a good 2b? I've seen some on eBay for £50 odd, are these any good, are they a good fit? Or are they universal? Thanks in advance for any help

[Bob Tucker]

a number of us have used Land Rover mounts...good solid engineering.....dirt cheap....

 

http://www.ebay.co.uk/itm/DEFENDER-90-110-1983-TO-2006-V8-ENGINE-MOUNT-MOUNTING-RUBBER-PART-NO-ANR1808-/251228445450?pt=UK_CarsParts_Vehicles_CarParts_SM&fits=Car+Make%3ALand+Rover&hash=item3a7e61db0a

Bob

[Guest Griffgriff]

Thanks bob, I'll get them ordered!

What about the piece from there to the engine?

[Guest NantLladron]

^{i bought a set from retro ford , perfect fit for my silvertop into a S7, they come with ebverything , rubber mounts , plates bolts , spacers etc , you just need to cut the tube to length and weld}

Edited April 16, 2014 by NantLladron

[Guest busby]

Gbs sell a zetec mounting kit

[Guest Griffgriff]

Thanks all for the info!

Another step closer...

[tractor]

i used retro ford for zetec to 2b

[Guest Griffgriff]

Does anybody sell pre made mounts for the Zetec in a 2b, or shall I get the weld your own kit? Thanks for the help

[Guest Griffgriff]

Does anybody sell pre made mounts for the Zetec in a 2b, or shall I get the weld your own kit? Thanks for the help

[tractor]

i couldnt find any premade mounts luckily cos they wouldnt have fitted any way i used the retro ford d i y mounts got the engine in position bolted plates to engine cut poles to lenght and angle then tacked together no kit is ever the same so premade mounts are useless

[Guest Griffgriff]

Retro ford kit it is then! Cheers

[flameredturbo]

I bought retroford also. I asked this exact same question about pre made, they don't really exist.

[Guest tiggertom]

made my own bit of plate and some box i had given,rubber mounts from old 1.8cvh engine. old aluminum cvh mounts fitted but just a bit off center of engine bay so did not use them