chris27

for insurance, i'd give frank pickles a call good cover and have proven a lot cheaper than flux to give you a ball park, 5000 mile policy fully comp on a 2.1 £140 with 3 points!!

yep second the boys at motorscope they are top !!

wow how's that for an invite !!! would love to, but need to escape the clutches of the mother in law!!!! will give it a good go!! ho ho ho have a great xmas

yep me and mrs p will be there

Would love to, but SWMBO has other ideas!!! visiting the outlaws in nottingham !! will be back in time for club night and will try and squeeze in a day over the festive break ....

It's A JH classic's Kit, which was launched at Stoneleigh this year, based on .... yep you've gessed an MR2 MK2

Just so happened to see what i beleive is an original dino GTS today in London!!! Stuart the offer is there to have a run out in it at one of the shows!!! might not be an original, but aiming to have it looking as close to over time for the min it's tucked up in the garage until i can stump up more bickies and bacon sarnies to fuel the NE boys to help with fitting the clam shells happy days!! cheers C

I'll be there .. with the wife!!! it's our wedding anneversary, so treating her to pie & peas and tyre kicking!!!

try an RL31 .... it's power band is lower, so you get more grunt lower down the rev rainge have one fitted in the hood and it gave me 178 bhp at the fly cheers C

great news on progress!!!! never know you might be completing it inside 10 years!!!! cheers Chris

try galadstone motor spares tel 0191 3771718 they are the guys who buy up a load of old stock from uncle henry and are top guys cheers Chris

sold to redspec!!!! should be at the next meeting, if not will sort it out with you cheers Chris

now then sir you have a pm with my details cheers Chris

I've got a pinto pin badge measures 3cm long and 1cm high any takers for £5 posted???

Hi All having a clearout and came accross a brand new bearing upgrade kit for the steering shaft here is the linkey to the NW site all about the upgrade and how to fit it to a 2B http://nw.rhocar.org/supporting_the_steering_shaft.htm brand new and unused yours posted for £8 send me a PM if your interested cheers C

Hi all Having a bit of a clear out in advance on new car coming in October and found a new set of shoes for a 2l sierras and a rear break cylinder all brand new and boxed £5 for each Not wanting to post so if any of the north east boys are interested send me a pm and I'll bring them along to the next club meet on 31st work permitting Cheers Chris

If your a Yokohama fan I can recommend parada 2's brilliant grip wet or dry and around£50 a corner Cheers. C

Car now sold and going to a new home in Barrow

Or mine!!! plug plug!! http://www.rhocar.org/index.php?showtopic=31141 do have someone interested and looking at it this weekend, hopefully paying deposit... cheers Chris

reduced the price by £500 as new project beckons brilliant car raring to go for the summer!!! give me a call or pm if you're interested cheers

Hi Steve I know it's a bit expensive, but i can recomend these guys.... http://www.firstmotion.co.uk/Online-Shop(1996769).htm fitted on in mine last year and is brilliant no problems and no worries cheers C

looking fab dude!!!! can't wait to be out tearing up the country lanes again shortly!!! cheers C

For Sale Robin Hood 2B 2.1 Reduced price must go to make way for new project!!!!! Robin Hood 2B purchased in 2003 and completed SVA 0n the 25th June 2004 and correctly registered as a robin hood 2B Plus on an age related place. MOT until June 2012 and taxed until the end of September. I have a big folder of history and receipts from the original purchase, through SVA, and covering the major purchases and MOT’s over the 7 years it’s been on the road, including engine, gearbox, panels, weather gear, instrumentation, seats etc. Price £5795 REDUCED to £5295 ono. If you're interested please give me a call on 07968024140 Here’s what it’s got Engine 2.1L Vulcan bottom end, double doweled lightened and balanced flywheel and a Kevlar race clutch Top end is stage 3, with big valves, RL31 cam, Vernier pully and Burton Alloy cam cover Twin dellorto 40’s with ITG filters a mangenosi short manifold, matched to the head Lumenition optronic ignition leads and coil with a Bestek rally distributor Alternator is a Denzo and I’ve recently replaced water pump, and starter. Gearbox was replaced last year with a first motion transmitions 5 speed unit. Custom Chrome exhaust and heat shield Shortened sump with added capacity I had the engine set up professionaly on a rolling road, where it gives 170 BHP at the fly and 132 at the rear wheels. Interior All carpeted, Smiths dials, including temp, fuel, oil pressure and clock. The speedo and tacho are from a Cortina GT . The tacho has been correctly re-calibrated to match the ignition. Richfield interior seats custom made with blue piping to match the car Sabelt 4 point quick release harnesses and sparco pads Electrics New premier loom was fitted over the winter, along with new SVC stainless steel 7” front lights Omex shift light and rev limiter SVC twin round lights at the rear on carbon mounts. Front and side indicators are all LED, with the correct relay Body Stainless side panels and back panels and GRP wings and nose The stone chip guards are carbon fibre from Carbon Mods. Just fitted brand new chrome wing mirrors from Tiger racing Doors and roof are fitted Wheels & Suspension Full set of 5 array 5 spoke alloys with Yokohama Parada 2 tyres with plenty of tred and a good spare Suspension is gaz adjustable shocks all round

Hi Rikky I do know of a really good robin hood 2B that might be up for sale in the very near future in durham let me know via pm or post and i'll send you the details cheers Chris

hi Rikky let us know where you are and we might be able to point you in the direction of any cars we know are for sale cheers Chris